Got mine at Gbody, but I think several vendors sell it.
Bought several thing from him, great on help and advise. Currently getting ready to put his headers on and will report on fit. (got to get finished...
If you have the tracking equipment you can test different turn on points for the second pump. Avoiding going over rich when the second pump kicks...
I have searched, but can not find the vendor that made a custom Turbo helmet. Anybody know or remember them? Suggestions?
Photos are great and helpful, but one question. How did you do the dash bar or does it not have one? Thanks
My kit is on the way, I will post pictures when done (Aug). I am for the mini tub also.
On Jay's SBC w/TT they talked abut an elec. trunk AC unit. I have not been able to find out anything about it. Anybody know what brand or anything...
I am going with the 10 Gbody GN wheels and will try the 325 or 345 drag radial. Just did not know what was an easy fit. Should I go with a...
Just ordered my kit. How big of rims can you run, or how much space does this kit improve? Thanks
Funny enough, mine went bad about 4 years ago and we looked at everything and finally got help from someone on the list and that was the problem....
Check what "notacarlo" said. It may be nothing but a convertor solenoid. You come to a stop and the convertor does not unlock and it stops the...
The car is fun as heck but I need the money right now.Anyway your 66 with the 3400 NL probably still gets triple the gas mileage of my Camaro. I...
Yes in my opinion a 66 and a 3400 NL may not be the cheapest on gas, but like others have said. It depends on what you want to do with it. Decide...
I loved the 44, PTE exhaust, on the street (with 55 lb and a turbo tweak chip). I went to the 66 (with no other changes) and could not spin a tire....
Heath, don't know if you were kidding but it sure brighten my day. You can only use duct tape, any plastic tape can make it's own noise (I can...
An "easy out" (available at Sears.) You may have to drill a start hole in the bolt. If you have the maifold off tape up every hole you can find to...
The first thing you have to do is find the leak. Get some duct tape and start applying it until you get it quiet. After you find the noise, start...
I think several of the venders can set you up with what you requesting. I have done a stock, a BGC 3 inch and now a GN1 unit. On the stock pipe it...
You should have a little slide arm at the bottom. This arm slids out, then you have to do your best to take the spring pressure off. (folding the...
Don't go high dollar I have a house with a four car garage that was a show home. The builder used the top of the line urethane. Yes, it is not...
Separate names with a comma.
