:mad: Ok, I tried the cam sensor at several positions just a few degrees before & after the setting listed on GNTTYPE & I still get the same...
I'm trying to finish a nearly four year long project with my 87 GN. Got the motor in and everythings hooled up now, but I have had everything (dash...
Looking for a set of good condition fuel lines for our cars.
Finally got the motor in and everything bolted up & wiring ran. I tried to start it and it seemed to fire a couple of times but wouldn't run. Kind...
I've got a booster plate I was going to put on my car. I've replaced the front cover with a H.V. one. I would like to use the plate instead of...
Match ported my intake & had a good port job done on my heads. I want to use the 1200's but what are you suppost to do about the valley?? I've got...
I ordered a set of TRW's & rings new off someone on ebay. The rings were in their original box but the machine shop is telling me that both #1 & 2...
Does anyone know how to get ahold of Ramchargers. Their website won't come up for me. They were the best priced for the new HV front covers with HV...
I've got a used 218/218 from Precision. Its been kept in good sahpe and only had ~ 2K miles on it when taken out. I've got all the lifters from the...
Trying to balance my rotating assembly and I can't find my flexplate. Where can I buy a new one or does anybody have an old one. THANKS
I was wondering what cylinders run leaner comparitively to the rest. I'm doing my machine work right now & it turned out that one rod was .015...
Has anyone had any problems runnig higher compression in these motors ~ 9 to 1. I'm taking my stuff to the machine shop this week and I'm gonna try...
Can you get the cable for the P.C. to the ECM anywhere else besides when you order Direct Scan. Does anyone have an extra?? How much & where can I...
Trying to find a good set of aftermarket rods IE Eagle H beams but can't find anyone. I'd prefer not to have to spend $1000. How good are the stock...
Can't find a machine shop around Louisville KY that has a torque plate or is know for Buick work??
Who sells these?? Can't find them on any ones website.
Need one good al brake drum and an alternator core. I have a good alt but the housing is cracked. a burnt one or lock up makes no difference....
Looking for a headliner in good shape or the best place to get one. I don't have the back board either so I need everything. THANKS
Trying to do a resto project. I bought a factory replacement Driver side header and cross over from ATR. They are both nice SS pieces. I can't find...
Separate names with a comma.
