Is it to late to get in on this? I'll take a set if their not gone...John
Mike, I'm interested in the 3 Inch set, could you send the other pics to John. Macpherson AT Elpaso.com?
How much to ship to a buisness in 14057?
Does the passenger front fender have to be loosened/moved to change the power antenna?... Thanks, John
OK...The soleniod measured 2 ohms, so that would make the expected current draw to be about 7 amps. Rossler said the current draw should be no more...
I used a non-pro Auburn on street tires for a couple years without much trouble but when I switched to slicks with 1.57 short times the Auburn split...
Thanks Don, Great info... I should have known that!
Dusty, Thanks for your reply!
Is it common to power the Tranbrake soleniod with a relay or directly thru the momentary switch?
I wired a new Rossler trans brake with a 5 amp fuse (18 ga wire on solenoid)that worked for testing with the engine off but with the engine running...
Is it sold? I'm interested if still available.
Is the modified ECM that is pictured with the Max Effort for sale?
I also bought a part from Rob, arrived on time and was packed well...very satisfied.
I'll take the ported intake for $225..pm with your paypal address.
Very interested in both but I have a few questions. Sending a pm.
would you consider a Silver '87 Turbo"T" with about 57,000 miles?
That sure looks like the same type of failure. Was that from your engine? Was that from a 1/4 mile blast or a extended top end run?
These valves are from a natural gas fueled, spark ignited, turbocharged large bore industrial engine. so no additives. the spark plus and combustion...
Has anyone experienced damage like this before?:eek:
Thanks for sharing Dave. Do you suspect an air distribution issue with your current manifold or is the "enterprise" really for the bling? Rainy day...
I had the same experience with TTA0wner. Fast shipping and safe packaging. I would buy from again.
Are both of the side view mirrors from the doors available? is so, how much to send to 14057?
Separate names with a comma.