Another technology uses plastic string like a weed-wacker, and melts off little blobs to build up the item. You can buy kits that print parts up to...
Where in Maryland? I'm in Laurel, and around here Burtonsville Machine has a very good reputation for knowing how to build these motors. There are...
The stock ecm with high impedance injectors will get a little warm but shouldn't get hot. One modifed with peak and hold drivers for low impedance...
Very nice. For those who haven't done the math, 30 psi boost in 3" piping means each joint has 212 pounds of force trying to pull the joint apart,...
www.mcmaster.com has a few styles, that's where I bought mine.
Sorry to be a few pages behind - Don, there is a lot of good valve spring info in the engine and advanced forums at http://www.speedtalk.com. How...
Thank you, Richard, for the detailed answer and the references.
Do you have any pictures or link to pics of the machine? That is one thing the tester never responded with; not even a manufacturer or part number...
I especially agree with the last sentence. The tester isn't saying zinc doesn't matter, he is basically claiming that there are other additives in...
Thank, qt6. In his tester the force pressing two metal surfaces together is steadily increased with one surface stationary and the other spinning....
QuickTurbo6, please read the threads on speedtalk and you will see how the tests were performed and what oils and mixtures he tested.
Well, now that everyone has had a chance to post their emotional reactions, maybe calm can prevail and science can proceed. I didn't post this to...
The lower the static compression and the higher the boost the more peak hp you will make, and the wider the tuning window will be for afr and timing...
Over on www.speedtalk.com one poster has been doing a lot of oil testing using a machine that measures the film strength of oils - in other words...
Clap, clap, clap - great news, Shane. Oh, if that is your back yard you have waaaaaaaay too much grass to mow.
When I saw my very first in-car intercooler my first thought was "How long until NHRA starts requiring hydrotesting on these?" :-) :-)
I intended for people to use a photocopier with zoom, and just play making copies until the 5" line was 5". Or, if you have a drawing program you...
Don, just for grins a 3.5" square aluminum plate (to approximate your 3.4" x 4" dropping to 3") 0.125" thick with edges fully fixed and 30 psi on one...
Usually a new supply line (1/2" or -8) is run to the rail and the old supply line used as the new return line.
If Grainger's has something in their catalog but a local store doesn't have it in stock, they have always shipped it to the store for free, in my...
Separate names with a comma.
