Turbo Tweak 60lb street chip 91 octane for sale. $60 shipped
I need a 109 block with standard bore. Bare block would be O.K. Anyone in or near San Francisco?
Can someone recommend a good reputable engine rebuilder in San Francisco. I bought a block and need to rebuild again. Thanks in advance
:mad: Fresh rebuilt with 370 miles. The motor sounds and runs great, then I started noticing the bad oil leaks. The intake manifold and valve...
To keep the cost down by just buying the steel crank only, can I reuse the stock rods and TRW pistons? Can the steel crank be externally balance...
On my engine teardown, I was really surprise to see the rollmaster chain so loose. I can move approx. 1/2" on both sides of the chain. :( I have...
Hello, Can anyone recommend me an engine rebuilder in or near San Francisco that knows about our turbo engines? Will be pulling out my motor soon....
Hello all, It has been awhile since I have been on the board. I will be rebuilding my engine again due to possible rod or main bearing gave out....
Trans. rebuilt early this year because I had no reverse when backing up. After idling for approx. 1 min. finally I felt reverse gear engage and...
I have stock GN wheels,very heavy.Are there any performance gain by using lighter wheels?I would like to buy a set for using on street and for the...
I ran a hose to turbo to wastegate(tuner style)and WOT in 3rd gear 3 times.Rock solid 16 psi.Then I open up the exhaust cutout and WOT boost shot up...
Anyone knows the efficiency of the intercooler around 22# boost at outside temp. @70 deg. F.?What is the percentage?Is it 80%,85% or 90% ? Thanks in...
I have a V2 Cas FM,TE61 turbo.Has anyone ever measure the temperature entering the intake manifold under boost conditions and what temperature is...
Did you get the bar yet?Keep us posted.I really want to know how it handles around turns and corners and the straight away take offs.Thanks Thomas
That bar looks nice and pricey $459.Supposed to help our G body cars to handle like a slot car as advertised.Has anyone tried out the rear anti-roll...
What`s the best strong pulling(seat of the pants)turbo going at 22# boost maximum?Worry about blowing head gaskets.Do want to R/R engine again.I...
My starter finally went south.So Yesterday I install the 92 Corvette LT4 starter and bought 2 bolts from Dealer.No shim Required.Very light weight...
After almost 5 years the MSD unit finally went south.I drove the car everyday to work.And 2 days ago my wife drove and pickup my daughter from school...
Has anyone tried it and any noticeable gains from the 3 1/2" vs. the 3" downpipe? Just wondering if it`s worth buying.I have msd50#,TE61,Cas V2 FM...
I have intermittent noisy lifter tapping noise left side.I heard that someone used Marvel mystery oil to help eliminate lifter tapping noise.Has...
Separate names with a comma.