Yes they sell pretty quick around here as well, but I can usually find the STS model much easier above the other models. I almost got the wife...
I've shot a friends Solo and it's a nice shooting piece, but it doesn't like 115gr. at all! It needs atleast 124gr., but if I was EDC'ing it I would...
I just PM'd you back, Byron. K.
I'm down to my last set of 885's as well... Been using the lifters from John Callies, Inc. on the last three motors with mild cams installed....
I just sent you a PM... K.
I do... Shoot me a PM with your zip for shipping, & I'll get you a total. K.
Bump... K.
Harrisburg, NC... Not too far from Charlotte Motor Speedway & Zmax Dragway! Lots of TR's in the Charlotte area, but it seems with age and...
Man... So sorry to hear this Scott! Holler at me if you need ANYTHING!! k.
I'm going to try and make it up, atleast to spectate if nothing else! K.
Looking for a Gen4 G-19 for my wife... I rented one for her & she liked it better than any of my .45acp. K.
I'd really like to move these bumper fillers off my shelf... The wife is wanting a new pistol, & I need to make some room for my turbo...
I was out of the starters for a few days, but have some more now. So here's the most recent list of what I have available: (1) N.O.S. power...
Does anyone have cam card information, that they care to share, for a larger build where they've used something that has 240* duration through 250*...
1.) Double check the insallation of the volt booster, loose wires, etc. 2.) Check the alternator output, if it's going bad it will cause the battery...
Pete... Sending you a PM now. Thanks, K.
I'm not very familiar with the Turbonetics line of turbos... I was wondering if someone here that was might be able to help me identify one? Stamped...
If you don't mock up the entire build & check everything, more times than not something will come back to bite you in the a$$... That's the...
As long as Summit doesn't have any old stock on the shelf, they'll have the hex in them. I haven't ever had any issues with the stud thread area not...
You'll want to take/send your camshaft and timing set to the machine shop so they can mock that up and make sure the rods aren't hitting the...
Separate names with a comma.
