We have the S400 75mm, T-6, 1.32 AR for only $11 more.
Spool is in the tune and parts. We can spool a 101mm with a 284, a 6.0l should be able to spool a 75mm......... Go with the BW475, AR 1.32, T-6,...
Budget... adding a turbo will blow your budget. Borg Warner will be the lowest cost (t-6 1.32), Master Power next Precision Billet For the...
We have never used that band. The MP now cast about the same a comparable PT. Still bang for the buck the BW S400-75-1.32 is a great unit for the...
What is more important, saving some money or getting a good reliable turbo? Will the money you saved offset the expense of repair if it fails....
The TRICK spring is not a street spring. It stores energy but has a lower spring rate than most stock springs. So it will ride much different....
Great looking sleeper.
Dude, it's your car do what you want too it. Looks good. Hope your enjoying it.
You don't want to coat the insides. Most coating will shed off in the heat and damage the turbine. Best idea with steel exhaust is drive is a lot...
We have seen both work. The issue is back pressure. The second is a little better design. It doesn't have to be a crossover style.... The biggest...
$30~$40 for Trends? Your not shopping at the right places..... :D
You can get upgrades pins from Trends also. Trends the push rods guys, make great pins as well.
Yes speaking with a shop that builds large forced induction motors can open ones eyes to lots of short comings with off the shelf parts. Plus all...
That sounds like a better choice.
0.170" is a little thin... It not just about handling the hp but being able to survive cylinder pressure spikes.
Well anything that will hold a 1000hp will need to be tough.
That is not too much an upgraded pin is need. If you looking for more a larger pin is worth the money. If you bend a pin you will have the SAW...
How much power are you trying to make? We use a lot of .190", .220" and larger sometimes Also depends on length.
We just cut up and got rid of a couple of g-bodys. I'd like to get rid of some stuff. I am sure we have frame and motor mount and a set of used...
Good looking work.
Separate names with a comma.
