Ok I will do that. I changed the fuel filter today and filled it up with fresh gas. Still the same problem. Should I order a new O2 sensor or...
Is my 02 possibly getting lazy? Dan, pm sent.
That's something else I'd like to do... if possible. I have an autometer electric fuel pressure gauge with the sensor installed on the rail.
The factory location o2 is the heated o2 sensor kit from caspers purchased less than a year ago. I just upgraded to the 6.1 chip and 60lb injectors...
Yes I have an LC-1 wideband but I currently have wot correction turned off because the wb is showing 22.2 a/f ratio and sometimes showing 7.4 and I'm...
There is no tire spin when this occurs. I've been going over the log and can't spot anything obvious. Immediate knock when I punch the gas but 02's...
I'm not sure if I'm getting false knock or not. I have a TT 6.1 alky chip with wot correction currently turned off, no other adjustments made to the...
Yeah I didn't put my foot down very far when it was acting up because I wasn't sure if the problem was in the tune. I picked up a new IAC valve and...
Failed IAC
So I made a few chip adjustments to turn off wot tracking in my TT 6.1 chip and now the car does not want to run. It will barely run and idles very...
With the new chip you'll probably want an adjustable fuel pressure regulator and a gauge so you can set fuel pressure to 43psi with the vacuum line...
What intake do you have? I had to use reducers for my stock maf that came with my kirban's (Tomka) 3 1/2" cold air. When I switched to the LS1 maf...
VR1 20w-50 non syn here too. I've been putting in a half bottle of zddp just to be safe on my stock cam.
Flywheel cover? Normal.
13.3 is lean, not rich (at wot anyway) unless you're looking to see 14.7 at idle. Did you upgrade the chip for the new turbo?
front of the block will have an oil drain hole for the turbo.
Personally I like mine looking stock to the untrained eye.
lol good answer.
check out the before black section. too bad it's a '78 rather than an '87.
GN came home tonight with a new valve body and shifting perfectly. Was told that over time the valve bodies can become pourous and develop an...
Separate names with a comma.
