I have used a dremel bit to cut grooves in the alum calipers. Carefully done it only took a few minutes a hole to cut the grooves to make stock...
Problem is the center of the pivot of the outer tierod would need to be around the center of the spindle arm. Being it would be difficult to raise...
The olds BFGs were fine when new even in a cant see out the front windshield down pour at hyway speeds. My mt radials have plenty of groove...
I would suggest checking out the Hellwing bar. http://www.turbobuick.com/forums/brakes-suspensions-tires-wheels/336206-rear-sway-bar-3.html
Truck 12bolt no. The truck is a leaf spring axle vs car 4 link. The a-body 12bolt with swap with some mods and swap control arms. Turbo Buicks and...
Nothing. The tan wire it grounded by the combo/prop switch to complete the brake light circuit. Leave it hang or clip the wire at the firewall.
Imo rtv would be seal it up with less mess.
I gave my calipers to a local machinst to cut the grooves and he said he couldnt. Wtf, how hard can it be? I used a hand drill and dremel bit #199 to...
Such things like brakes and exhaust changes all the time on my car.:D I have stockers on the car now. I had the sierras on my car several yrs ago but...
11 1/8 center to center
Best mod I have done to tighten up my g-body was solid body mounts. The ride quality is ALL in the suspension.
I tried a 275/40 on a 8.5in rim and it didnt look right at all.:frown:
Mastercraft 275/40/17 ZHP. Dropped tire pressure to 27, edelbrock adjustable uppers, boxed lowers, couple hundred extra lbs balast in the trunk,...
Wow! Those look awesome!! :cool:
2door there Charlie. ;)
virus alert here too.
http://www.turbobuick.com/forums/2320081-post15.html
The blazer bar will not have near the roll stiffness that a H&R/Spohn drag bars will have. Less effective as a drag bar but more ideal for a cruiser...
Forsure corners much flatter and feels tighter too. 4wd? The rear bar is off a 2 door blazer and the bar mounts on top of the axle. I dont know...
I installed solid bushings in my car. Its a driver. I had to soften the suspension with cheaper shocks. REALLY firms up the car. My...
Separate names with a comma.
