Complete set of six with metal heat shields. Excellent condition. Came off of my car with 10K miles....
TTA spark plug wires with metal heat shields on Ebay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7957865168
TTA owners kit on Ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7955805776
I have an NOS GM fuel pick up and sending unit kit for the TTA. Included in the kit; pick up + sending unit assembly, tank gasket, pick up screen,...
I have a set of 4 original GoodYear tires off of my TTA. They have 10k miles on them and are in excellent condition. I want to sell them but I...
My original Power Master pump started blowing fuses so I bought a remaned PM from AutoZone. I had a local GM dealer do the installation since I have...
Does anyone else experience the battery going dead in about 2 months of storage? This is the second time the car has done this. Both times with a...
At what point do the stock heads and cam become a limiting factor? I ran a 11.70 at 114 with a 1.59 60'. Would heads be a good idea at this...
Is there a 9" AND a 9.5" N/L from the Real Art Carr? I thought the Art Carr units were 9" but I see some posts listing a 9.5":confused: What...
You guys have e-mail , please respond if you can. I realize you're moving! Thanks
Is anyone using this intake? Pro's, Con's and other mods needed during installation? Thanks
Well first of all, I'd like to thank EVERYONE on this site for their help and guidance through every step of the way. I wanted to wait until I...
OK Ladies and Gentlemen:rolleyes: I busted my butt and finally finished my car this weekend! I need some tuning advise for my new combo as...
Can anyone tell me where I can purchase an adjustable actuator for the TE series turbo? Online store prefered! Thanks
I am going to need injectors to go with my new TE60 turbo. I am considering the MSD 50's or Delphi 50's. Is there a difference? Which is better?...
Just a quick question! I noticed a 1/16" crack in the 90 degree vacuum elbow that goes on the FPR. :rolleyes: Question is, where can I find...
I've always liked the NGK V-Power plugs and used them in my first GN back in 87 with no problems, but I can't remember if they were UR4's or UR5's...
Just noticed my drivers side header is cracked. I guess that explains the delayed spool-up!:rolleyes: The ATR headers have 1.5'" primary's. Is...
First time installing THDP. Is there anything I should be aware of before I start? Any typical problems with waste gate puck? I'm also...
I hope someone can help me with this. I spent last weekend tuning and tweaking with the OTC 2000. Everything went well until I checked coolant temp...
Separate names with a comma.
