Car has sold. Thank you
Hey all. Been sitting on this for a while. Found me a donor car and got my quarters and floor pans. The last section would be the t roof. Since then...
some newer pics also consider trades or partial trades towards gn parts, skylark parts and possibly my 80-96 f series truck project..
not sure if I should make a new thread but I am trying to move this car on again..I have since worked on the floor put the front end together and...
Thoughts and prayers from my family to yours..
Thanks a bunch for the info..Getting some ideas , have a few converters hanging around, blue streak D5, monte D5 and an old AC non LU...
Very interesting, thanks for the input...I wasnt even aware what other engines it was used with.I had only been aware of the 3.8 Buick combos....
So the 200 is suposed to be similar internally as the 2004r? At this point though I am talking a stock unit behind a stock Buick 350 without...
I have asked around a little..So far the response is negative...I figured I would ask here... I am not looking to do anything but put a stock...
So sorry to hear about the accident..I wish you a full recovery.. Best wishes to you and the family.. Chris P.
I assumed that the paint wouldnt be thin enough.. Agreed, however, this was just to put carpet in a budget daily driver, My GN will get...
Makes sense , thanks Sal, think I found your post in the search ..Had one of those as well with the graphite chasis lol:smile: Good to...
Did a little search here on the board. Found a couple posts on the subject.. Wondering if there are any success stories..I picked up a decent...
Thanks John, I have almost always thought the same way till I ordered some sheetmetal for a buds truck and they specified the opposite and...
Correction, that should read: 2384 Pass for AZ ,right for Rock 2382 Driver for AZ , left for Rock
I t looks like you are correct on this..Using autozone and rockauto to compare.. they each have the same part numbers but one uses left and...
I dug out a set of extra mounts I needed to use and one of them was clearly marked "right"..I intend to use this on the drivers side.. Left and...
From what little I have come across on the web, I have yet to see an example a quarter job done using the factory seam on the g body Regal....
Here is one example of another members car [IMG]
Hey all...Been a while since I stopped the restoring process..After playing with a MIG a little on other projects..I am starting to get more...
Separate names with a comma.
