:p
Congrats on the 9.84 robert. Does anyone know what turbo is on that truck in the video (midwest Syclone)? comp. and exhaust wheel? BigAl...
What is your d and p gain set at? BigAl...
I had a similar problem on my syclone with the FAST, with Harry's (PTE) help (and a call on the red phone to Craig Smith at FAST) we decided that it...
The Greddy T-88 is NOT an 88mm turbo, the supra guys swear by this turbo, it does have a very big exhaust wheel (did I mention very very big wheel)...
as I understand it, that sensor (89 turbo Ta) is the only 3bar ms in existance (correct me if I'm wrong) and I also beleive that they only used it...
Hey Opel, what was the cost of the map sensor and the software? TIA BigAl...
7.70 @ 181 Does this mean you're gonna change your screen name to "SevenSecV6" ? Either way congratulations!!! BigAl...
oops though ya ment something else gotcha, I understood it as something else. getting back to your post we sure have come a long way! although...
FPR? what's the problem with the fpr? it doesn't really matter what fpr you use, assuming you don't use way to much pump. Remember the fpr just...
Larry, remember the best 9.0-9.5sec. car is a detuned 8.5sec car if the boys are saying a T76 is good for 9.0-9.5 maybe you want to go with the next...
No, it doesn't matter what value you start at as long as you enter the off idle value. FWIW my idle value is 29. BigAl...
Guys I had this same problem and I received the option files from Lance (thanks Lance!). the simple solution here is to run a thermostatic swith to...
YES these problems are a result of turning the ignition off while online. to avoid this simply hit F2 and go offline. HTH BigAl...
I currently have a FAST system on my GMC Syclone with the PTE P&P harness, the ignition setup is GM HEI, I would like to switch over to an MSD crank...
BTW Nolan has a 4l60 not an 80 in his typhoon. BigAl...
Nick is correct try using a richer a/f ratio, some cars (especially modded ones) prefer more fuel for cruise and idle. A good practice is to log off...
I hate to ask, but did you configure the fast? inj size, firing order etc... BigAl...
I thought MSD made a stand alone 2step rev limiter that could be installed on almost any ignition? I've been hearing this bad rap for years from...
Separate names with a comma.