[IMG] i used a rotozip to trim my fenderwell
Did you check to see if you have spark to the plugs?
Saw those .. look good.. i wanna see em installed in the car
Did you double check you didnt cross any plug wires?
Are you getting spark? Fuel pressure? If you have a noid light you can check injector pulse Did you check your ecm fuse?
Lets see some pics with them installed :)
They wont fit.. You will need a spacer or aftermarket valve covers
I removed them and used an AN fitting for the cooling port on the turbo [IMG]
Not on the car i was working on. The tube a-arms that gbodyparts.com sells are very inexpensive When i did mine i also got the lowers [IMG]
You know it
Are you taking your turbo buick?
Ok, here is the story id tell. Was at the track.. 25 PSI launch on the transbrake.. Wheels up launch hit the rear bumper causing the rear wheels to...
It will really piss em off if you spank em down ;).. I say go for it
ahh. the good times at Rubys and Noble.. Who knows might catch a ride up there and hang out with you guys... [IMG]
Had the same problems. Get some HR motor mounts and turbe a arms.. And you will more then enough clearance
Welcome to the site
Brian at gbodyparts.com has them on his site
[IMG]
It dont hurt to have one, they just arent needed on a Turbo Buick. I'll admit they sound cool though
Separate names with a comma.
