Wow I'd jump on that...........
TB.com is a good source for technical info if your stuck, some members have been messing with fast systems for years............
You can datalog your ve in your logging set up and yes they are manually inputed but the logged data will be the actual ve the computer is using...
I know this question is not for me, but I'm using a magnafuel tiny 750hp regualtor it flows 6 gpm, don;t be fooled by its size. I love my pump its...
Log the AFT correction, about a value 5 will take you about 45 seconds to zero with 1000 rpm idle on a hot motor,,,
Right here.................[ATTACH]
Afterstart correction not decayed out will not allow closed loop, you afterstart decay values are too high. This is the number or crank revolutions...
Hi the pull up resistor keeps the crank or cam signals reading a voltage when the sensor is in the off state, when the sensor goes to on state it...
Here this might help, if you take I-90 its about 4 hours away, or 250 miles. [ATTACH]
Contact Reed at work Turbo's he can help you out.
I would suggest Cal takes the family on a little vacation to Toronto, and at the same time tune the small line up of local stage II cars.......while...
Doing some reading on hp/rpm vs air flow vs cubic inch............seems peak hp based on cyl flow will occur between 8200-8800 rpm, if I had a 4.1...
NIce setup you have Greg, I added you to yahoo, I have it on my cell at work we can chat about the resistor.
Is the power grid doing any timing retards for you? Here is a little thread on the grid with XFI....
I do appreciate everyone's suggestions, but here are the facts on the GV unit. Its costing me maybe 2-3 HP....
Iv'e thought about changing the gear, but the board members have talked me out of it. I love the GV would never take it out of the car.......not an...
Yes , and it was ordered that way so i could drive it in OD.....without being loose...........
Sorry they won;t work for you good up to about 540 lift only they will leak oil on the high lift..you need the crower lifters, as they have a higher...
I have a super tight 16 vane pump version 9.5" here is a log of the spool up.[ATTACH]
i'll get you some pics when I can..........68512 i think is the number shielded foot lifters, whats your max lift?
Separate names with a comma.
