Charlie, I got the Vortech version too. Paid about $100. The major difference on thew Vortech is they don't have the pigtail for the direct...
Oh ok... You were talking about carb adapters and I thought you were talking about low riser intake manifolds. Never mind! I'll try to did up that...
Loyd nailed it... For the Front: Stock is 5600 or 5602 at a rate of 346 lbs/inch Next step is 5606 GN springs with rate of 420 ....for more...
Here's a great page with spring specs for a Monte SS: New Page 1 When I upgraded my 79 Regal, I took the easy way out and used stock GN spec...
Charlie, is that low riser a 4.1 intake? I picked up an Edelbrock dual plane and it's HIGH! It should work for a blow-thru tho.. I have a...
Hey Vince! I'm south of you...below Quakertown and near Doylestown. My 79 has been off the road for years, but in its time it ran great.... floor...
I'm a step ahead of you Charlie!....I bought a 5462 on eBay for $100.... it arrived yesterday.:biggrin: I already have a MSD 6A, so this 5462...
Monte Carlo SS's used the 7.5 inch rear. 3.73:1 gears in those! The later 84(?)-up turbo Buicks and Olds 442 used the stronger 8.5 inch rear. They...
Jim, I had my 66 Buick 401 done at Markovitch in Warminster. About 10 miles South of Kirban. Good guys, they're familiar with the V6 too. Align bore...
Done yet?:tongue: Hey, what are your thoughts on single-plane vs dual-plane intakes for a blow-thru? Does the conventional...
That Holley advise posted here; http://www.turbobuick.com/forums/2397486-post65.html You will still need to route that line thru a switched vacuum...
That's what I read too. I just got a wideband A/F gauge. Went with the Innovate LM-2 handheld. I got the full kit for $311, but the basic can be...
A quick search of the forum led to this excellent link: petesbuick.html My explanation: Most carbs have a circuit to adjust fuel mixture based on...
[quote="bobbybike, post: 2409590"]:confused: Just took off oil pan the f-n pickup screan has alot of crud junk and dog hair /QUOTE] DOG...
I thought the Chevy used a different trans bolt pattern than the Buick-Olds-Pontiac? You have the Th-350 right? Buick brackets won't fit a Chevy...
One of the ports on the turbo carbs is routed thru the PECV valve (Power Enrichment Control Valve). It richens the mixture at 60-80% load....
You say it knocks, but I can't hear it from here. Do you think it's a rod knock? Is it always there? If you wasted the rod or main bearings, an easy...
Mike, the paint looks awesome! I like that rear spoiler too.... I gotta get one of those.:D Did it take much to modify it to fit?
Water cooling has been popular for at least 10 years.... Our Buicks are OLD tech!! Charlie....In general, from what I understand turbo sizing is...
Absolutely! Thank you.
Separate names with a comma.
