After many yrs I am getting my 85 GN back on the road. I am having trouble remembering how the wiring harness snaked across the front of the engine...
Can I see the timing chain tensioner through the fuel pump blockoff plate or some other way without pulling off the front cover. I had the motor...
I just had my motor rebuilt and had a dbl roller chain put in. I'm not sure if the rebuilder put back the chain tensioner. I understand it should...
I just had my motor rebuilt and I gave the rebuilder a dbl roller timing chain to install. I have since seen comments that the chain tensioner...
I have my rebuilt motor back and the rebuilder has a tag stating to retorque the heads after 1/2 hr of running. I think I can get to the bolts...
I am about to rebuild my 85 and am considering Poston's GN107t cam. What are experiences by other on this cam I also need to pass CA smog. Is there...
I just bought an '85 motor and trans from a wrecked GN. It is supposed to only have 30k on it. It has been sitting as the hoses are all dried up...
I have 200K on my engine that was bored .30 I assume to rebuild it again it will need a .30. Can these be taken out that far without overheating or...
Postons headers I have them installed and they went on fairly easily. Mine have cracked slightly on the left side just above the flange but it has...
low fuel light on digital dash Can this assembly be made to work on a digital dash? Looks like you would have to cut the film to fit the assembly...
I want to install the cooler in conjunction with the coil in the radiator. I would assume I would go into the radiator and out through the cooler...
Who in the LA area would carry short blocks for 3.8 Turbo. Mine's been bored .030 and w/120K I don't want to bore it again prefer to buy a short...
Reading the ranges in TX that UNGN posted for smog makes me wonder about the ranges I/we are held to in Calif. I have had to go to a "Test Only"...
just installed TA33 I just had mine done by Limit Eng, it took about a week after he got it. Shipping included $836.73. You can see below my mild...
I had my turbo rebuilt to a TA33c and installed it. When I started up the motor no oil pressure. I tried to prime the pump by putting oil back down...
O2 and CO readings Thanks. When I lifted the EGR the motor stalled but did not die. Since I have the turbo off the passage in the intake is at...
My '85 gn failed and the parameters are listed below. I have since changed the O2 sensor and EGR solonoid. I lost the Turbo a week after the test...
Thanks Thanks all my turbo is on the way to John now.
I lost my turbo yesterday and would like to upgrade it to a TA 33C. What if any are the disadvantages? Can some one recommend a shop to do the...
Trying to get my '85 GN to pass Ca smog. I replaced the EGR controller and checked the EGR for function and it is free. At idle I get 3" vacuum at...
Separate names with a comma.
