subscribed
if you have checked all the fuses in the fuse box....One last place to check is the Fusable Links located under the car and attached to the...
Love the "T" mats.
Since I'm running with a oil restricter, I'd like to have turbo drain kit that would show flow back to the block. Maybe with clear tubing.
It took some time but I think I got that table done. When you suggested that the program was sensitive to electrical load. First, stabilized the...
Cal, Can you give more detail on the Inj.Opening Offset vs Battery Voltage . This table is currently showing 2.20ms @8.0v to .53ms @16.0v....
Actually I adjust the injector opening time to match the Actual A/F with the Target A/F Map @ Idle, then drive and log the Fuel Correction % ....
A book would only give you a ball park estimation...If you want to get the real number...You could put an oscilloscope across the injector to...
Had to peddle it there since the govenor spring was twisted and in the pan...Ronnie and Mike took care of it ....Just like allways...Great...
Cal, can you send a copy this way when its ready . I think Holly has my CC info from a previous purchase....thanks ....john...
Can you send the 2011 turbo catalog....Thanks...john jjkv@comcast.net
Works great, no problems with the USB to serial...Ive used it on the classic FAST and XFI ....john
Can you send the updated flash ? Thanks jjkv@comcast.net
It could happen....Just got the motor in ....and get the combination lined out... :)
Sorry to hear that. I do remember following her up to the Bellville car show. I know she had a great time with all the Houston Buick...
Try putting some ocatane in to see if if it really is due to detenation or if it is something else. My knock gauge was doing the same,,,turned...
Yes, I do use one on my TA Block and yes I do have a solid roller cam without any problems. I just use it for tuning purposes ..using race fuel...
Does anyone know what the minimum / maximum oil pressure should be using a -3AN oil feedline with these ceramic bearing turbos? .....john
Thanks for the vote of confidence :wink: but no thanks :wink: :wink: Miss T is a creation in the making, just like the chili was, tried...
I will be there with some winning chili :) ....john
Separate names with a comma.
