Subscribing
Anyone got a good ignition module? Want AC delco and as close to new as possible. Or new. I'm out south near Burbank. Let me know what you got and...
It looks like you are running your fuel lines on the driver's side, opposite from factory? If so, got any pics on the routing to the engine...
Final update everyone, I'm hoping. I believe everything is solved for now. Car is starting without a problem the last 4 days, warm or cold. Drove the...
What are some signs of too wide spark plug gap? Spark blowout I imagine? Also too tight gap? When should it be closed or opened?...
Yeah. Thought I inspected all of them when the motor was out. I had the car idling for about 20 min without it shutting off. Also moving all...
Something really odd just happen when I was testing everything. I do one thing, move wires, adjust whatever, each time try to start. Here’s a step...
I plan on trying that next to eliminate the fast ecm and harness from being bad. Have two stock computers on hand. Just need a chip for 83s. Only...
Yes
Yes. Checked it. I can communicate with ecm when cranking. Shows rpm voltage etc..
Is there any kind if switch that prevents the car from starting if it thinks it's in gear? Brake pedal pressed?
Yes, did the RJC mod before putting the new motor in last year. It's tight.
It has spark, but I will check again. Voltage is good at about 13+ Volts. New alt and battery. Injector harness plug shows 12V, but no pulse I...
It does not act up, just shut off. No signs of it coming. Actually, the car runs great. After it shuts off, it's still showing 40-43psi when...
Yes, FP is good. Stays around 40-43 when cranking.
Here's a quick update. Had some time yesterday to try a known good module and coilpack. It would not start before the swap, or after :(. I tried...
Will do. Trying to get ahold of one to test. My lower intake and the bracket are powdercoated. Would that interfere with the ground?
Another update. My problem is back again. Same thing happening. Car dying and will not restart. I buttoned up everything I took apart previously and...
How but adding some fins (1-2) to distribute the air flow to the uppper part of the IC?
Just a regular angle grinder with 4 1/2 cut off wheel. Cut like butter. I cut a bit at a time and was willing to remove and cut more to get where I...
Separate names with a comma.
