[ATTACH] Love lightning rods won't miss a shift Posted from the TurboBuick.Com mobile app
Not fixed yet taking it to a local guy Posted from the TurboBuick.Com mobile app
Rear seal or valve covers. Make sure PVC valve is working keeping boost out or put in an inline check valve. Posted from the TurboBuick.Com mobile...
first one lasted 10 miles and second bill it one didn't last 1 first gear pass at the track Posted from the TurboBuick.Com mobile app
Wonder how flip got killed? Posted from the TurboBuick.Com mobile app
That's good probably went bad when fuel pump was changed. Posted from the TurboBuick.Com mobile app
That also Posted from the TurboBuick.Com mobile app
Usually that's an indication of a bad ground Posted from the TurboBuick.Com mobile app
Need to take off rockers and do a leak down test Sent from my DROID RAZR HD
Downpipe will not give a knock signal. You can also check accessory noise by removing the serpentine belt and drive for a short run to check for...
The bolt on the back of pump to pump bracket Sent from my DROID RAZR HD using Turbo Buick
Also the 2 orings under cover have no lip seals that are flat. Sent from my DROID RAZR HD using Turbo Buick
Well it started last year I have a full billit tranny built by Janis with all Ck performance parts. My servo always leaked bad and for only a few...
275/60-15's they are 28 tall you will gain some mph. Sent from my DROID RAZR HD using Turbo Buick
I would look into a 28 inch tall tire instead of overdrive. Sent from my DROID RAZR HD using Turbo Buick
don't race in over drive. Especially if not tuned for it. Motor is more sensitive the higher gear you go. More tolorant in first and second can get...
it shifts back and forth violently going into second at wot
My ck servo leaks bad. One day has a 2 ft puddle under it. I tried everything I also developed a fucd up 1 2 shift after a few hundred miles. Its...
http://www.racetronix.biz/itemdesc.asp?ic=FITM%2D003&eq=&Tp=
I went with a 6an from the regulator to tank. The hose I got from summit 16 foot premade. The regulator fitting is a 90 degree metric 14 to 6 an...
Separate names with a comma.