I second that, you shouldn't tighten them too much. Just handtight is enough for them....If they are leaking during priming already then they...
Thanks Mike, still any good advice is welcome always so don't hold back if you see anything that seems a bit off :)
I'm very sure that timing equipment was acurate. I had to lift about 50m before traps as it just had started raining and it got slippery. I...
I haven't logged my EBP but I'm sure that it's definitely too much. As for changing gears or turbo then as I'm planning to take one year off...
I'm using T6 and it definitely can't be less as I'm struggling with BP already now. exhaust housing is 1.38 and turbine wheel is 102mm.
So as I have understood then actually this cam has played the major part in the fact that my motor has held together so well. Although I am spinning...
Actually it's not so common around here to keep this kind of information as a big secret. So it didn't even come to my mind that sharing this...
Cam is Comp cams #93-000-9. [IMG]
No, less overlap would be great, right now at the high rpm my turbo is blowing out of the exhaust. I have a 88mm turbo and I can't get boost over...
Tire is 33x16x15, right now I have a little bit to go before I run out of gears. I go through the traps at about 8000 rpm and my redline is 8700....
Turbo is custom made in Finland (LDS Turbo). He used Garrett hot side (a.r. 1.39) and Holset compressor side (87,5mm).
Car is tube chassis big tyre 7.5 sec certified chassis. Motor is stage II Anderson built TSO engine: 153 block, Bryant billet crank, ross pistons,...
Hi, posted it on video library already, but thought that it doesn't hurt to do it here too :) My first 7 second run, hopefully will get some better...
And one cool compilation video of the weekend that was taken by a friend. [media]
Three white friendly guys with three black evil cars ;) A nice photo we took during the weekend at race. [IMG]
2500hp is with gasoline, with alcohol it's considerably less. I have two of those...
Was a tough weekend at Finland. As we were used to slippery unprepped tracks then it was very hard to get used to prepped track. Also we forgot to...
Hi, just wanted to share one nice video of the championship race we had a week ago. As we don't have any prepped tracks here then we race on the bare...
Really nice, what turbo is that?
Separate names with a comma.