I do not know why gm put the foil on with grey goooo, but it was the location of my first leak also.
More than likely there are multiple holes ready to surprise you. I have never seen a tank with only one rust spot inside. I would try a coating if...
I have seen cores go into mid 300s before.
Put the chip in, then start looking at your numbers. the tt chip was set up hopefully for your low boost goals correct???
Well you got me on the boost controller vs adjustable wastegate rod, Imho I would do an adjustable wastegate assembly or mod the orig one for a...
Not bad for the first time out, it does take seat time as Grumpy said. I was wondering what the 02 sensor readings are, stock turbo, low boost with...
The shield should be very easy to conceal inside waistband, I went with the walther pps which is the same size and carry iswb, very nice, shoots well...
Lee Thompson in the BG kentucky area, if this is who you are talking about, he does good work. Thanks Bill
The real value is more like 800 to 1000 if it turns over freely, there are a lot of parts that are still usable, that is if you get the complete...
Same here, glass bead the interior and put some dielectric grease in them, works great. thanks Bill
The danko fiberglass used to be the better option, then came spoolfools, which look good for the money. The best are the gbodyparts.com replacements...
Yes some tsa racers are using the 233/ 237 unmodified regulators, I am adjusting fuel in the chip. Thanks Bill
should be enough turbo, injectors and converter for mid tens, probably more than what the motor will do.
55s should be good for 10.70s, and a good 340 will be maxed out around there also. 11.00 you will be fine with a 6031 or 6069 minimum. it will take...
I would suggest looking at the sog twitch II, assisted blade opening type knifes, Kershaw. smith and wessons etc. My wife loves here twitch II, I...
Try Nos4gn.com, they do not show on the web site so I would call them, or gbodyparts.com. shows to be on backorder, again I would call them to....
I had the originals that chalked up weekly, then daily, and finally cracked all in two years time. They are on the way out and I would replace them....
My orig 11,658 mile motor was painted more than just overspray along with the water pump in black, covered nearly 75%. Just my experience. Thanks...
According to RC the buick was 27.2" in front and 26.8" in rear with full tank of fuel. It is said to be buick specs that are used in TSA class...
Have you changed/rebuilt trans or converter lately?? Thanks Bill
Separate names with a comma.
