When you roll into it do you get knock at the shift ? Because it's possible to get false knock from broken motor mounts , tranny mount, or any other...
The window stickers on the chevelle + the front plates and your motor & tranny were built by D. Husek , if current pictures I say NY .
With a ohm meter check the resistance between the grey and black wires that go up to the pump. The resistance should be about 1 to 3 ohms , this is...
I know it's a joke but it wouldn't suprise me if our NY Gov thinks it's a good idea !! :eek: www.policymic.com/articles/28140/ny-drive-act Sam
I have the Savage 110BA in 300mag topped with a Leupold mark 4 6.5-20. The gun is 16lbs with no scope has a 28" barrel with a muzzle brake that works...
Check down at the starter.
Let's get it running first , verify that you have 1 for 1 in FP ( don't just go WOT, build boost slowly and watch FP) and who knows maybe it will be...
Can you see both FP and boost pressure while driving ? For every 1 psi of boost your fuel pressure should rise 1 psi , so at idle if your base FP is...
After you get it running, this problem is probably why you are sputtering at 10 psi of boost ! Get a gauge so you can see it rise 1psi of fuel...
If you have 14v going up to the top of the don't stop there . If you have a meter check the resistance of the pump at the plug . It should be 2-3...
What did you find ??
We just went through the same problem earlier this month with another member . I don't know how to link the thread but it was called "Stranded, Fuel...
Yup 10 mins from me..... Can't wait to seewhere he got those guns from... SW 38 revolver , shotgun , & yes a Bushmaster AR15, just more fuel for the...
I'm going to a gun show on Jan. 5th ...can't wait to see what they want for AR parts.:eek: Sam
Make sure you have plenty of thread showing , you don't want to bottom out the nuts when torqueing the heads down ! I don't know if this is a problem...
5044982 would be just the motor, All those motors were shipped from Delco Products Rochester as motors only , we didn't install the impeller.
Hell, back then I paid $14,900 for my loaded astro roof 86 GN with my GM discount !!:p Sam
That is exactly what happened to my car & truck, Racetronix has the parts you need. Glad you found it. :) Sam
Boy I'm glad I was listening to Zepplin & Yes back then , guess I didn't miss much.:D
Yes there will be cylinder deactivation (Lifter Oil Management Assembly, aka, LOMA ) on Gen V V6's , V8's and soon on the corvette motor but not sure...
Separate names with a comma.
