Two versions of the GN1 head stock and 14 bolt version. 14 bolt version uses individual rockers, like the SBC. Push rod length is VERY important to...
Easy answer: NO! Ported irons are capable of serious performance.
I typically use any of the vendors cork gaskets with silicone on both side. Now as far as the girdle/pick up issue............I end up fabbing a...
If you added up all the .1 and 1 mph's listed in his cataloge your TB would run with John Force! :eek:
That is what I do. I run a hose and a give it a 360* loop and suff a cheap plastic fuel filter in the end of it and seacure at the back of the car....
Better ring package. Modern rings are much better than stock ring package. The stock piston works really well for most folks, though. We do not...
We are running 10.0's on a 3" down pipe and a 2.5" dual system with THREE ultra flow mufflers. How fast are you all running needing a single 4" or...
Oh crap........what the heck does Nick Know? He runs a stupid V6 and thinks everyone should, too. I too agree with Nick on this. If you...
Mazda? I'm installing a 5.3 with a 76mm turbo in a '92 right hand drive Mazda. For my kid. Wish he would have gone Buick instead. But then why...
Why is 12 pt better? I've used both over the last 25 years and have not seen any gain at all. What am I missing?
No such thing as too much oil unless you are talking pressure. Keep the hemorrhaging to a minimum and you will not need a lot of volume. With a...
Gene Fluery use to have a set of Ti rods pm him and see if he still has them and what size they are. If you need his phone number pm me Mike for his...
Dennis Hogan has run a 10.16 @ 136+ on Pump gas and dual nozzle methanol. StageII 274", TA Eliminator heads, TA headers, 215/220 Hyd Roller cam, TA...
Depends on what exhaust you run.
Valve seals and or Valve guides
Uhhh ok. You have two pumps with itsy bitsy outlets and you think that it needs a -8 AN to work???? No way a -6 will choke those two pumps. What...
Oh man you just spilled the beans on a 75-300 horsepower secret that no one was supposed to tell. Now you are gonna have to hire a body guard to...
I have an actual twin turbo FBI car and sure enough it's there. Weird thing is it was for a nitrous injector to cool the cam sensor gear for extreme...
Hahahahaha...... Funny Earl. I've been critical of them since 1988. If you bought everything from their catalogue you would have beaten John...
Use the factory style pan intake gasket unless you plug your PCV valve. Using the Felpro 1200 intake gaskets will require modifying your PCV valve...
Separate names with a comma.
