Can a switch be connected between the 2 ports on the ALDL and switched on when I'm on the highway, or will it fry something? I replaced my...
I installed Comp springs in my 70 Z28 and their just fine. Maybe your locks were not sitting in tight. [img]
I tried many many waxes on my 87 GN with original laquer paint. After a few washes the black paint goes grey in areas, ecpecially the rear qtr and...
Looks nice.
Why not use Taylor Vertex :: 80 Years of Heritage and Legendary Quality
I had a new 86 GN and new 87 GN then sold them and in 1990 I bought my current 87 GN with about 5,000 mi from the 1st owner. I currently have...
It was the hose off the waste gate T and the hose going to the passenger valve cover. I'll have to go to the dealers and see if they have the shaped...
Thx, I'll use up the 15 bucks I put in the other day and go back to using 94 but I'll try Petro Canada 94. I hear too many people with new trucks...
This week when I took out my 87 GN and hammered on it, it started to ping bad at high RPM and both red boost lights are lit. The same thing happens...
The cold start idling high is normal for a couple of min.
No problem. I have an automatic email whenever a post of mine is answered. This is normal for all GN when cold.
Have you tried adding a can of fuel injector cleaner into the gas tank. I smelt a rich condition a couple of times and fixed it with a bottle of STP...
Thx, To me you need more clicks than the 2 clicks Chilton specifies so the cable moves in and out of the plastic conduit with a longer travel so it...
Guys, I just finished doing the front and rear brakes on my 87 GN along with 2 new rear emerg brake cables. Do the rear brake adjusters really...
Do you recommend knocking out the tab on the rear drums to take a feeler gauge measurement for the correct drag for cooling after doing the rear...
Guys, I replaced both rear brake wheel cylinders since I replaced the rear shoes/springs and for those who have replaced the wheel cyl know that they...
I replaced both rear brake shoes with a new spring kit and both emerg brake cables and wondered how many clicks on the emerg pedal I need to hear...
Guys, I'm replacing both emergency cables on my 87 GN and wondered if I should apply some sort of lub on the outside of the casing that in exposed to...
They won't slide without noise if they are not lubbed. The garages always lub them. * are the spots to lub www.nastyz28.com/~copo/brake3.jpg
BTW, there were some great suggestions on installing the wheel cyl locking clip you guys came up with that I wouldn't have dreamed of. Thx again!! :)
Separate names with a comma.
