So, I got back to my car this sunday. Started it up, Ran Like sh#t, Visually inspected the crank pulley. everything looked fine. seemed tight. pulled...
Thank you all for taking the time to reply. On my other 87 gn the cam sensor blinks so you can see it until higher rpm. But maybe its just that car.I...
So I am trouble shooting a problem on my car that has been a problem for 14 years. Symptoms are The car shuts down at random moments and wont start...
So I am swapping dashes and started this project a year ago. and cant see where some of these wire go. [ATTACH] what does the big white/gray...
Im just trying to supply ennough fuel for the Turbo That I was going to run. A Precision 6776rhps. I have to buy a new fuel tank anyway's so i...
So I am trying to run a Aeromotive A1000 fuel pump and all -8an hose and fittings in my 85 T Type, my question is, I want to run -8an Fuel line up to...
So I have to buy a new gas tank for my 85 T Type. and Im wondering, why wouldn't I buy a fuel Cell? I have to get a new pump too so maybe one with an...
I have an RJC 5inch down pipe and 4 inch exhaust on my black T Type. it sounds mean, has the maximum amount of flow, and the Build quality of the RJC...
So I have a stupid question. But I have to know. How many quarts total does the transmission, cooler, and torque converter take? the cooler is stock,...
so with the key on should the white wire (pin a) show ground? it is listed as a bypass wire. does this bypass the cam sensor input and run the...
Awesome info! thanks
So if I have a caspers cap on it with the LED, which blinks so I know the hall effect is working, it shows a correct DC wave form on my O scope at...
So if it batch fires at first cranks how does it know to go into sfi mode?
So Ive been trouble shooting a injection issue on my 85 T type that I converted to all 86-87 injection exhaust and wiring (factory harness and all)...
Thanks for the encouragement too.
I just think i have an issue with the harness i've bought. the whole end of it had been chopped and re put togeather. and I had chased all of the...
voltage is good. my resistance is low on all of my grounds, the alternator does charge. and when i put my battery charger (300 amp) and unhook the...
i have the pump on a 40amp relay off a switch in the car as well. the fuel rail shows presssure for sure. the grounds are all grounded and grounded...
it is all new. i rebuilt the motor but i am pretty sure it is all put togeather correctly
I have a bench top meter that goes 5 decimals points before the number. My TPS is good. no dead spots at all. and I can see it gradually go up in...
Separate names with a comma.
