I'm trying to connect an HKS Super Sequential Blow Off Valve but not sure how to connect it. I searched the forums and Google but with no luck...
Edelbrock timing set, pretty sure I have #1 cyl at TDC. How can I know if the cam gear is 180 degrees off or not? Looks like the o on the crank...
Sorry, the scan tool tech forums look dead.lol I have an old IBM Thinkpad R30 laptop with direct scan installed. When I try to open it, it says the...
Hi. My TA49 is showing a little more shaft play (side to side only) than normal and I want to get it fixed. I've researched some prices for a...
Hi. I searched but couldn't find a diagram of where the vacuum hoses go between the solenoid and EGR valve. Coming off the top solenoid tap/barb is...
Where can I get these thick gaskets from? I'm having trouble sealing up my intake to the head. I read a while back about someone using these and he...
Looking for some help on an 87 GN. Key on.... still have the 5V signal for the center pin(B) on the cam and crank sensor connectors but the 11-12V...
I keep finding one with no wires coming out of it which I assume is for a non-turbo model. Called a stealership who had a picture on his computer of...
Just connected a scanmaster and the reading at idle from the tps is 4.5 or so. When I go to full throttle, it reads 0-.50 and on. If the PO wired...
Help! I need to borrow an 87 GN MAF if you have one. I have to get my sled smogged by Friday before my temporary movement permit expires. Help a...
I have an apparently old T+ Version 1.1 but you'll probably need carbon dating to find it's true age. I have everything hooked up but there are no...
If one wanted to hardwire a MAFT and use some generic NAPA connectors because he was cheap, which wires would go to which? Also, which pins are used...
My garage and house are filled with smoke as we speak. I put a new engine in my 87 Turbo and I'm getting smoke from hell. I suspected the turbo so...
I just got my engine installed but I have a very high idle at about 2000 rpms. I'm thinking the IAC and/or TPS are out of whack but I don't have a...
What is the cylinder compression supposed to be? I don't have a manual and I tested an engine someone was selling. I was getting 110-120psi across...
I know the Turbo link is a bit slower than the powerlogger but I'm impressed by the Turbo link's multi-color display. I'm considering mounting a...
I'm trying to decide on which scan tool to get and wanted to see if someone could take a picture of the gauge-style Direct Scan display(s). I saw...
Is an o-ring supposed to go in the groove part(Garrett 60 turbo)? If so, can I get one from a hardware store or does some kind of special one go in...
I'm looking to do a rebuild on a 84 GN block but which has an 87 GN intake,turbo,etc. and wanted to see if it's better to source a 109 block instead....
Would anyone happen to know what it might take to fit a supercharged L67 long block motor from a 96-98 Firebird/Camaro onto a GN bellhousing (hybrid...
Separate names with a comma.
