You will need a modified ECM for the 120 or bigger injectors. Talk to Bob Bailey regarding low impedance ECM.
Use size as close as possible but it will not make any difference if they are not exact.
My 500+ rwhp parts were an existing Walbro double pumper, stock lines, 120lb injectors and a new F.A.S.T tune. Substitute a new chip for the tune...
[ATTACH]
Cali guys, we have 5 AZ cars in Escondido waiting for a race. where are you Chicken? ...............
Sorry for trying to give advice on a $10 part. Time to take a long vacation from this board.
Just go to local parts store and buy a 6 or 8 position fuse block, then power it from your existing fuse block or your battery. I mounted mine behind...
What housing did you have with the 45A? Would be nice to compare turbos with the same housing.
How much boost?
Why is your boost dropping after 4700 RPM?
Put old IAC back on and see what happens. Check plugs and ohm wires.
I can hardly wait to take it for a spin.
Should be able to run a high 12 if you can run enough boost on 93. It is all in the 60 ft.
30-32 gap
Reds chips were the best for me during all my injector/modification upgrades. At the track they consistently performed the best and I tried all the...
Just another Arizona dominating Turbo Buick. Harold and the Chicken do not want any part of this beast.
With my front mount and the AZ blast furnace temperatures my car would run hotter than with the slic. Since I have converted to E85 the running...
I would check pressure with both pumps running to see what baseline is, on my car it is 60. When does the 2nd pump activate? Your numbers may not be...
Found a similar problem on a pump a while ago, it was a loose fuel pump line in the tank.
I relocated mine in the trash.
Separate names with a comma.
