rev limiters and machine gun sound:) ...sounds fun for about 5 minitues...4:45 sounds cool...
like a 10.90 car with a 12.2 driver...not that i know how to drive:(..i don't even race but just saying:)
seek out the Canadian made:cool: spectra ...cheap on ebay..i forget the part#.
funny i was going to ask to see if other memebers are seeing the same with their gauge? up top (15#) the guage inside does not go backwards...just...
yeah i'll try the air injection and guage change...does it matter when to do the air test..like let it relieve of the pressure to nil?
this thing hits past 60's very fast when boosting, in tank rubber hose is new and clamped. remember it did this with the last pump too.
before you view it, i've gotten lazy and have not checked for line kinks front to back. changed the fuel pump (aem 320) guage still does the same...
anyone know the source just for the over axel side exit tail pipes section?
to keep the cost minimum you should be picking up stuff from the parts for sale section;)
the remote oil lines can be done from under the car and un doing them at the filter end.
to each their own but i dropped in one of those aluminum f body. the bottom hose requires abit of trimming and i used the cooler on it as the oil...
i would go another few seconds and watch the guage. it does stop at its peak.
i would remove the starter and fan, i've done it both ways with the bumper on and off. Take it off if you don't have the reach. small rolling jack...
boosting and posting to tb.com from iphone at the same time..eho_O
ALKYHOLIC ....my third brake light:D ....its the car officero_O
if your doing it because of the air intake? try this..this is where mine is strapped to. [ATTACH]
i used the cooler on the radiator as the oil cooler...no problems so far...i thought maybe the size of lines would have something to do with it but i...
is it a bad idea to use the cooler as an oil cooler? ....this is what i did...i've got external cooler for the trans.
sure it does...i just did this swap. i'll post pics later. but if you are going to put one in, just buy new as it cost me like $68 shipped...$100...
warm it up in the driveway up to temp and then rev it a few times until no more condensation ...but it is most likely turbo seals.
Separate names with a comma.
