Ok had my GN for a while now and the tranny has shifted flawlessly and has been quiet. Well that is until I did a couple burnouts from a dead stop....
How much power would you pick up on a stock long block with out of the box GN1 heads over stock iron any dyno results out there? Say 18 psi stock vs....
My car has this rattle coming from what I think is the alternator. I did a quick search of this and noticed that some guys are breaking these...
So I put my GN on a serious diet, mostly the front end and it has raised the front end about a half inch. what would be the easiest way to drop it...
So I decided to change my intake gaskets because the end seals were leaking. And upon disconnecting everything I find this one wire going to the...
I found a bad wire right above the connection that clips into the fuel injector. I just want to shorten the wires about a half-inch and reconnect...
Just wanting to know other peoples experience with a race chip running C 16fuel. How many passes are you getting on a single wire as opposed to a...
Don't know if it true but heard that newer 3800 L67 heads are better than the LC2's any flow data or truth to back this up? Can they bolt up to a 109?
Does anyone know where you can buy AN fittings to our metric fuel rail and return out of the regulator?
Paper work with my car says my car has a CAS extended wide mouth intercooler. Who made these? Are they modified stock intercoolers? Just wanting to...
Merry Christmas everyone. Just wondering who has rebuild kits for the G80 factory posi
Just wondering how effective the stock intercooler fan actually is. Am in the process of changing the crank pulley out for an aluminum unit and was...
Could someone fill me in on what year F body hollow front sway bars bolt up to TR's. Also what's up with the Jeep steering shafts do you gain header...
I am considering a purchase of an 87 GN from AMc in Palatine, Illinois. I am looking for some feedback as to the company's reputation. And also help...
I am considering the purchace of a GN from "AMC" in Palatine IL could anyone give any feed back as to their reputation as a business I would...
Does this mean I have to replace just the cap or the damn thing?
So just wanting some feed back on what a complete frame is worth and where one Might find one?
Does anyone have any dyno #s on a stock maf to lt1 maf translator conversion. Just wondering how much HP was in that little box lol.
So my car has been running rich for a while now. So I finally took out the ECM to see what kind of chip was in there. Come to find out it is a stock...
So I found that my crank sensor has been rubbing the reluctor wheel making the car run like shit. So I readjusted it making sure that it has the...
Separate names with a comma.
