Discussion in 'Mid West Area' started by daturbosix, Jul 30, 2010.
need a gn deck lid, 3.8 hood emblems, and possibly a steering column asap, thanx
Get in touch with me.
I still have a steering column. -------Jeremy
Thanks for the help xxquick6xx and Jdpolzin.
Just throwing it out there before I go buy some Aeroquip socketle$$ hose. Looking for two roughly 20-foot pieces of -6 for a transcooler if anyone has some pieces they won't use laying around.
I have 20ft of brand new -6 hose for sale.
I also have 20ft of -8 available. New as well.
Is that pushlock hose? I need pushlock because I have the fittings already
Big Box 'O Power Window Parts!
Anybody needing any power window motors, tracks, regulators. I got some collected from several G body cars over the years.
Lots of miscellaneous linkages and clips and other "inside the door" knick-knacks hiding in the box too.
still need a decklid, i prefer a gn one thanx
i got one off a T, its decent... workable... little rust along lower lip.
id trade for a case or 2 of cheap beer.
I am selling a S cover Billet Wheel 6262 journal bearing with a HD actuator. Black ceramic coated .63 exhaust housing. Looks brand new. $700
Also Brand new in the box Bob Bailey 2 step. $220 New is $230 + shipping.
Price change on the 2 step. $200 pick up in West Suburbs. Or can meet within a short distance.
I'm in the middle of a rebuild. Would like 600+/- H.P. while maintaining as much of the stock appearance as possible. Looking to buy new in the box or a few used parts if they are in good condition.
- ported iron or Champion iron heads
- roller cam and/or rocker arms
- .020 or .030 JE or Diamond pistons (new)
- turbo (preferably stock appearing) ta 61, 62... 66
- good set of headers and crossover
- 3'' down-pipe
- stock location intercooler
- 60lb injectors
- girdle or billet main caps
let me know if you have these items or other parts in good condition if you think I might be interested in them for my build up.
I have a brand new in box Champion stock ported intake. Send me a PM if you might be interested.
I work in Tinley Park, could pick up from there?
I have the following:
GN1 3" SS DP with 46mm gate and boost controller (NEW)
TRW Forged Pistons
ARP main studs, Head studs, head bolts, rod bolts etc
CAT 4340 stock stroke steel crank (NEW)
ProGram Billet Main Caps (NEW, front 3)
New Timing Covers
BGC Custom Intake with RJC spacer and billet fuel rails (NEW)
Main and Rod Bearings (new)
72# injectors with 3 chips
83# injectors (E85 and GAS/ALKY chips)
Stock Turbo Cranks
I sent you a PM! ----Jeremy
I put in a motion to kill this thread and start a new one with up-dated items for sale...
seconded and I'm just going to go ahead and pass the motion too :biggrin:
Separate names with a comma.