Does anyone make a harness to relocate the ecm module to a different location than the floor. I am sure this would not be to hard to fabricate. It is a real pain to keep pulling it from the kick panel to change chips.
Instead of relocating the ECM, maybe we could have some sort of adapter that would plug into the ecm where the chip goes with about 3' of cable and a chip socket on the other end that could be mounted in the glove box or some other more convenient location.
my cover thing wont' screw back in, i just kindof rely on luck to keep it in place, if it comes out, i just have to take a fast right turn that woudl be a good ideal though, in the trunk would be a great place.
