Fast XFI, GTQ70, Champion Fuel Rails, 96lb Injectors,Champion Spacer

Discussion in 'Parts for sale' started by 87TurboGN, May 8, 2012.

  1. 87TurboGN Member

    Message Count:
    87
    Offline
    See pictures below. I am beginning to slowly part out my car. Parts have all bee used less then 500 miles. Call me if ou have questions 859-312-3184 or message me. Paypal accepted, but you pay the fees.

    Fast Fuel XFI includes:
    Fast XFI ECU w/o2
    Buick Adapter Harness 36"
    Internal Data logger
    XFI Thumbwheel
    3 Bar Map Sensor
    Wideband
    O2 Bung
    Fuel/Oil Loggin harness with sensors and fittings
    Conservative tune loaded.

    $2000 Delivered - This is a $400 savings off a new set up wtih these items

    Limit Engineering GTQ 70MM Turbo
    3 bolt
    4inch inlet
    2.5 inch out
    Journal bearing
    1 HD Actuator
    1 LD Actuator
    4 -AN Feed Oil Line Included
    Feed and Drain Fittings included
    Perfect condition
    $1000 Delivered - $400 less than a new one

    Delphi 96 Lb Injectors - 6
    Excellent condition

    $300 Delivered - $100 less than new

    Champion Fuel Rails - NON STOCK FUEL REGULATOR version
    Excellent condition
    Bolts included
    $200 Delivered - $50 less than new

    Champion 1" Plenum Spacer
    Gaskets and Bolts
    $75 Delivered

    This is only the beginning of my parts, more to come after these.

    Attached Files:

  2. larry33kc Member

    Message Count:
    847
    Offline
    I will take the spacer. Let me know how you would like payment
  3. TurboTJT Member

    Message Count:
    132
    Offline
    I'll take the Champion 1" Plenum Spacer.
  4. TR Custom Parts Mark Hueffman - Owner

    Message Count:
    8,428
    Offline
    fuel rails? will those fit the stock intake? I know you have to use an external regulator with these.
  5. marleyskater420 still needs to learn

    Message Count:
    891
    Offline
    Yes the champion rails will fit.

    You need some washers to raise the rear of the rail up so that it sits flush, but they fit and look so damn sweet.
  6. thenasty6 Member

    Message Count:
    116
    Offline
    do you have a turbo oil drain?
  7. 87TurboGN Member

    Message Count:
    87
    Offline
    Yes, i have the AN10 line that runs from the bottom of the turbo to the oil pan.
  8. thenasty6 Member

    Message Count:
    116
    Offline
    im not fimilliar with that, will it work on my 87? i just know mine goes from the bottom of the turbo to the block of the motor in the front. mine is leaking bad and i wanna get one and stop puring in new oil all the time.
  9. 87TurboGN Member

    Message Count:
    87
    Offline
    This is not what you need. You will have to get that from one of the vendors on the forum.
  10. thenasty6 Member

    Message Count:
    116
    Offline
    ok thanks.
  11. pdzz fixing something

    Message Count:
    1,100
    Online
    PM sent. Phil.
  12. 6 Shooter New Member

    Message Count:
    21
    Offline
    Anychance there's a downpipe coming in that lis
    t?
  13. 87TurboGN Member

    Message Count:
    87
    Offline
    Spacer, Injectors - Sold

    Sale Pending on Fule Rails and XFI, please continue to email if interested though, just incase it changes.
  14. 87TurboGN Member

    Message Count:
    87
    Offline
    XFI sold. Thanks Phil.
  15. highboostgn Well-Known Member

    Message Count:
    1,392
    Offline
    fuel rails still available?
  16. 87TurboGN Member

    Message Count:
    87
    Offline
    Fuel Rails Sold. - Have Turbo and lots of other stuff not listed yet. CAll me at 859-312-3184 on my other parts if you need something.

Share This Page

^ Top