GN sold...parts left round 1 big list

[grocerygetter]

this is the current list (if its not here its sold):
Champion GN1 heads, aluminum...used. valve springs unknown, I was planning on race porting these and doing new springs. $800
(20) 12x1.5 chrome lugnuts & washers, open, proper shank length for Centerline wheels. $12
(20) 1/2x20 chrome lugnuts, open, acorn $5
Dorman, doorpin kit, two lower, one upper $8


This is all that's left.

 

[grocerygetter]

prices do not include shipping.

 

[threerail]

I would like the Heater valve and hoses, s hose also for water pump, thanks, rob

 

[BoyWonder]

Paypal?

If so - I would please like:


Grey console lid $30Grey door pulls $15

Kirban billet valve cover breathers for stock valve covers (used) and Stock valve covers and bolts ($45 all)
Black turbo heat shield (oem) $20Heater valve rebuild: AC Delco heater valve (BNIB), Kpp 6595 heater hose kit (BNIB) $60 (Is that the heater control valve & the three small hoses near the back of the firewall?)wastegate regulator and y-orifice $15 for both

Thanks

 

[precizion818]

I would like wastegate parts and door lock covers

 

[GN Luver]

I would like the black turbo cover and possibly the stock valve covers what would your best price be shipped to 60441 for all? nut I definatly want the turbo shield lmk thanks you can pm if easier as well thanks again

 

[grocerygetter]

At this point of this post, everyone is in line as you see here. No pm's unseen thus far.
Three rail ...s hose, heater valve and hoses. $85 plus shipping.
Boy wonder...console lid and door pulls. turbo heat shield and stock used valve covers with bolts and Kirban breathers. $105 plus shipping
Precision 818...door lock parts and wg actuator with y orifice $24 plus shipping.
Gn luver...second inline on heaT shield

I need you guys to pm me or post zip codes so I can check shipping. Money order is preferred, but PayPal can happen as long as you add the fees on your end.

 

[BoyWonder]

Thanks for the update:

In addition to what you mentioned, and per my original post - I would like
Kirban billet valve cover breathers for stock valve covers (used) and Stock valve covers and bolts ($45 all)
Black turbo heat shield (oem)
My question was about:
$20Heater valve rebuild: AC Delco heater valve (BNIB), Kpp 6595 heater hose kit (BNIB) $60
(Is that the heater control valve & the three small hoses near the back of the firewall?)

wastegate regulator and y-orifice $15 for both
(Assuming it is the wastegate modulating valve?)

I am no parts pig though and if one of the above members needed it worse than me to get a car running, I would gladly defer.

I can send a money order ahead of time or what have you if you want to avoid PayPal fees.
I am at 30049 - Georgia for shipping calcs

 

[Phoneguy]

First in line pending pics.
KPP7190 (bnib) door and trunk key plates and gaskets (black) $9
Hood pad clips, 5 used, 5 new $5

Bryan

 

[grocerygetter]

Phone guy...precision818 already asked for lock trim. Hood pad clips aren't a problem though. $5...these could go in an envelope easily. Let me finalize with precison818. The five used hood clips still look fine enough and have enough teeth to reuse. The other five are obviously brand new.

Boy wonder...answer to both of your questions is yes. I will go back and edit...you spoke before gn luver on that stuff. Sorry. I misunderstood.

Anyone that wants pics...I will post one when I get to the office.

 

[LIVE4RDO]

I'll take:​

KPP6776 (bnib) door strikers (black) $13
KPP7199 (bnib) exterior reveal molding clips $11​

PayPal info please with shipping to 10301. Thank you.​

 

[bpman1234]

is that ac delete pully used with stock belt ?

 

[grocerygetter]

live4rdo...got ya
bpman1234...I bought it and never used it. It's the GM one and looks like its the same diameter as the AC compressor pulley, so I would say yes.

 

[grocerygetter]

 

[grocerygetter]

there is one misc part that is next to that underhood light, I don't know what it is. LOL
I've got some work stuff to tend to ASAP. Let me get this out of the way and on my lunch break I will PM everyone about payment and shipping costs. Thanks for working with me.

 

[grocerygetter]

boywonder, threerail, precizion818, live4rdo...you all have pm's.
editing original post for what is avail.

 

[grocerygetter]

(20) 1/2x20 chrome lugnuts & washers, open, proper shank length for Centerline wheels. $15
(20) 12x1.5 chrome lugnuts & washers, open, proper shank length for Centerline wheels. $15
(20) 1/2x20 chrome lugnuts, open, acorn $5
Dorman, doorpin kit, two lower, one upper $10
Turbo tweak 114+ octane 50# chip $50
Underhood light (kind of rusty) $2
Door panel clips (1 box) $4
Hood pad clips, 5 used, 5 new $5
b-pillar seat belt trim 1 grey, 1 blue $5 both
AC delete pulley $25
Black turbo heat shield (oem) $20
(2) ARE 15” wheel center caps $5 both

 

[grocerygetter]

GN luver...what do you want other than heat shield? See post prior to this one for current list.

 

[GN Luver]

well I wanted the valve covers to

 

[grocerygetter]

boywonder is sending payment on those.
check your pm too...updated with estimated shipping.

precizion818 and live4rdo...I have payment and I am trying to get shipped out today. I may not be able to make them go out until Monday though. I had a death in the family and trying to put together service stuff in south AR. I can for sure get them out monday however. thank you guys.