this is not even close to what has been already achieved.60lb injectors with alky should be good for the 450ish rwhp range of power .
is the 60ft soft?whats the 1/8 and 1/4 mile mph?7.1 1/8 11.3 1/4 22.9 Deg 1st/2nd 20.8 Deg 3rd 0 Knock
Boost was way higher than I thought PL was on 3bar scale with 3.5 AEM MAP sensor
Thanks,
Thanks,
volts to pump?
without alky they have been over 600hp and if i remember correctly the car et'd around 10.2.this was on race fuel and higher pressures with volts to the pump.if you were referring to e85 i do not know the limitation.i do know 60s and alky are good for 9s without the injector wide open60lb injectors
look at the 60ft and gains from the 1/8mph and 1/4mile mph.see what the backhalf is.your tune is pretty aggressive now.the stock motors really need to hammer the first half of the track down.60fts should be in the 1.4 range and high 6 sec 1/8 ets.Just standard Hot wire w/GSS294M
is the 60ft soft?whats the 1/8 and 1/4 mile mph?
mph is way soft you are blowing through the converter most likely60' 1.56 1/8 mph 94.7 1/4 mph 116.5
mph is way soft you are blowing through the converter most likely
cant lock a protorque 9.5Converter not locked
his is the 200 masterDave Husek built trans (Best thing I ever had done!)
i have you around 12% slip.