Recent content by 85turbo T

I will have to give Cal a call monday and see if has has a awnser.. As far is timing I dont think 18 deg 15 psi is that aggressive...

Norbs thanks for your help..I will try doing that in the morning and see what i get..Iknow the tune isnt that good where there is no knock.. I spun the tires real hard the knock gauge showed knock in the red but the ecm didnt pull anything out which im not happy about..It always pulled timing...

Thanks for the response Norbs... Im sorry I forgot to say that its a bank to bank box. This is a new problem the last time i took the car out with the lap top in the car everything seamed to be working ok. I made some changes i was gonna do a little tuniing and noticed that the Ecm wasnt...

Im having a problem with Ecm not pulling timing out when I have knock. Casper gauge shows knock but nothing on the dashboard.Check wiring to the ESC to the Ecm with a ohm meter and it checks good. The gauge has always seams to be more sensitive then the fast ,green lights never showed up on the...

Thanks for your help Ken. I welded the two aluminum spacers together.THe one that came with the girdle and the one that came with the new pan and turned it down to were i was happy,I also had to massage the tube a bit..

Thats what i thought.Im planning to use the spacer that came with the girdle and what came with thw pan and weld them together and then mechine it down to where i want it...Thanks for the help Ken Tom

I seen that too,but I think that 3/4" is a little excessive..If I remember correctly the stock pan with the girdle was 3/8"..

I called and left a message when i found the problem but i think they were closed for the weekend..My question was is that how it was designed..

I just went to install my new deep oil pan and when i checked the pan to pick up clearance it was a little over 3/4 inch.. I was hopeing to see 3/8 to 1/2 of clearance.. The spacer that came with the pan was about 2" not sure if thats right for a pan with a girdle..Anybody have experance with...

Jack cotton is great to deal with and offers great support..He is also close to you..

No the car isnt ready to run yet.I wanted to make sure everything was still on the ecm..

I had to set the time when i turned the LT on. Btw its a Gateway.Are you thinking it's a LT problem and not a ecm problem..I will have to try another LT.. Thanks for the reply...Tom

I parked the car 3 yrs ago.Now im ready to start playing again and wanted to check over the program since i made some changes.Now the laptop i get a "ecm not found". Please tell me thats not a hard problem to solve.. Thanks for the help .. Tom

Ford ends Is the tude dia the same as gm 10.5 rear. Also the gives you more options if you choose to upgrade to rear disk brakes?Wish i new about this before i put eliminators on.

Napa front cover Make sure your filter bolts adapter correctly to the cover. I bought one not to long ago whent threw the trouble of drilling and cleaning up the ports just to find that it drilled right for the adapter.:( :frown: