Recent content by Allen Vos

Just looking for some info on exaust housings that come on any factory cars Im dont own a turbo buick, but instead a twin turbo mustang Ive grown sick of busting the 302 blocks with boost and decided its time to upgrade and put a 351W block in the car. The pair of turbos on the...

I just want to say that I talked to Chance at Devils Own and we got every thing sorted out. He has just been busy and told me that the best time to get a hold of him is in the later evenings. Chance gave me some good information on METHONAL injection and told me He would look after me for...

Which would be a good pump to get that would stand up to 100% methanol??? I was running a shurflow 8030 pump that was purchased from devils own alchol injection. This pump has EPDM/ Nylon valves and a Santoprene Diaphpram, and runs at 150 PSI pressure It is reccomended that only a 50/50...

As far as the Methanol Kit It is basicaly a shurflow 8300 series pump designed to run on methanol and according to the caculator on the Devils own the M14 nozzle that I am using flows 14 GPH @ 100 psi. I installed a pressure gauge inline and can see 150-160 PSI. So in reality I am likely...

OK , finally got a chance to do this . I ended up running the methanol straight. I changed the injection nozzle to an M14 that I had , just to be safe. It was a huge difference between running straight methanol and running washer fluid. I was able to get 15 PSI of boost and 25 degrees of...

Hey guys Sorry been busy the last few days, couldnt get a chance to post. I picked of a 5 gallon pail of methanol and I am hoping to get a chance to try it tonight or tommorrow night. I guess I was trying to find out how close winshield washer fluid is to a 50/50 mix of meth. Im...

Hi Guys I come over from the turbo mustangs forum, this site has been highly reccomended for information on Methanol Injection. I know Im not running a Turbo Buick but just looking for some feed back on what I am doing. I run a 91 mustang 302 5.0 parts are as follow stock cam and...

Hi there Ive been reccomended the M15 injection nozzle from mcmaster car part # 3178K77 , for my setup. I wish to install this into my charge pipe(3" steel) right before the throttle body. Does anyone know what fittings are involved in doing this???? Im just not sure how to go...