Recent content by edfiero1

Thanks guys!!!

I'm trying (for the first) time to DIY swap my peg leg rear end for a TrueTrac. (Not changing Ring Gear or Pinion, so I 'thought' it would be easy. HA. Boy have I got a lot to learn) So, stupid newb type question. The new unit is in the car, axles and c clips back in. The car is still...

Guess this project went no where.

this is an ancient thread, but it deals with my exact issue. My car has factory cruise, but it is not working. I suspect that the brake switch may be bad. I have 12 volts in the larger, 2 wire connector, but I get no voltage to the smaller connector with 3 wires, 2 gray and (black ?)...

One more time.... got it installed? Any measurable performance improvement??

I put on a new crank sensor with the Caspers adapter recently. It solved my no start condition.

Have you been able to install the headers yet? Do you consider these a performance improvement, or is it just a stock replacement? I was confused with the terms 'Stock' and Headers being used together. Also, the guy who fabricated for you.... you said he made up a jig, does that mean he'd be...

I'll bump this old thread instead of creating a new one: Will a bad MAF and/or bad MAF translator cause the car to NOT START.

Did you mean MAF sensor?? Yes, did pull this one apart and reseated it. Also had the coil connector apart multiple times checking the voltages. No dice on those two.

Car cranks but no start. Fuel pressure good. Fuel pump primes with key on. Check engine light on with key on. No spark No fuel injector pulse as checked with a noid light Confirmed 12+ volts on both pink wires at the end of the C3i Not quite sure what to check next. I think I've made it up to...

Got it installed yet? Any pics?

@VtheGNMan @m233roller Wow. I see what you mean about the insane shipping costs. I had no idea it would be so much. Looks like about $55 bucks. I tried both Post Office and UPS. Both were about the same. Maybe I could get the cost down to around 42 IF I can get the spindle to fit in one...

For sale are a set of McGaughy's drop spindles. New they are about $200 bucks. Selling this good set, just removed from my car for $80 plus actual cost of shipping. Let me know if there are any questions.

Seems like there is a lot of this out there. I called Speedway Motors about a set of Spindles they were selling. Had to talk to 3 different people to find out if what they were selling is a 100% stock replacement. Then even after I got to the GM Tech 'Expert' his answers to my question...

Perfect. Thanks. Based on this I can see that I'm now in the market for a set of stock spindles.