Ok I just put wires and plugs on the car and wanted to verify that my wires are on the right spots at the coil pack. But my coil pack does not have any numbers on it. Can someone please tell me the numbers for the towers? Also can someone verify the cylinder numbering on the engine? Just want to...
Does anyone have a list of the RPO codes for the 1984 T-type's? I looked on gnttype.org and it only goes back to 1985. I remember seeing someone post a link to the 84's codes but cannot find it now. Any help is greatly appreciated.
Thanks
John..
I was wondering if turbo motion sold the intake by itself. I would like to get everything but the intercooler for my car. Do they have a web site that i can get this information from? Any help greatly appreciated.
John..
update
Ok here is an update on the car. I checked everything according to Buick From Hells list and it all looks good. So I got a 86/87 style coil and module from redregalt on here in the parts section. I also bought all the stuff from caspers to swap it over. Put the coil in yesterday and...
Buick From Hell,
Thanks for the reply. I will take the coil off tonight when I get home and look for the wire. I will let you know where I find it at. Since everything else looked good I have a 86/87 style coil on the way so I can check it out. I figured I would just change to the newer style...
I was using your write up to trouble shoot my no start problem this weekend. I think I have a bad coil or module but where your write up says to measure for 12 volts at the coil with key on it say to measure this at the blue wire. I do not see a blue wire anywhere on the connector that screws...
Buick From Hell,
Thanks for posting that for me. And thanks to everyone for all the ideas it is helping. I got out there yesterday and found the ground wire on the drivers side firewall (braided steel strap) was not connected. I could not get to the bolt I think it should go to my hands are...
Stealthfxxr
Thanks for the reply. Is there any way to check these sensors or is it just a replace and try sort of thing? I just found it odd that it was fine then after the transmission shop it did not work. I am used to non computer cars so this one is just a little fustrating. I got a...
Ok this car is about to drive me nuts. When I bought it the engine ran fine. I could just hit the key and the car started right up. I droped it off to have the transmission rebuilt and now it has problems. When I drove it home from the trans shop it was acting like is was running out of gas so I...
Nocooler,
Thanks for the links. Looks like I need to add this to the list of things to do. Also another question. Where can I find information on the I/C and intake you have listed in you signature? Thanks
John..
Well the dash guages on the car are not working at all so I am going to be getting all the guages I need together. I had already planned on the fuel pump and adjustable regulator. How hard is it to switch the computers? I thought the scanmaster would work with the 84 computer I take it that is...
I just bought a 1984 T-type. The car has a brand new rebuild on both the engine and transmission both back to stock. The car needs some TLC body and interior wise but all in all a nice car. My question is this I want to make sure everything is fine with the car so I want to purchase a...