NY Twin Turbo
All the good stuff.....Times 2.
- Joined
- Dec 10, 2014
Yep, that's the one. Mine looked just like that.
turbo 6 emblem on intake
- Thread starter crashedout1
- Start date
crashedout1
Active Member
- Joined
- Feb 23, 2011
That's the one that's goes on 84 mines a 84
crashedout1
Active Member
- Joined
- Feb 23, 2011
Did I just get jacked?
NY Twin Turbo
All the good stuff.....Times 2.
- Joined
- Dec 10, 2014
What makes you say that? Because your not the only one looking for the emblem?
crashedout1
Active Member
- Joined
- Feb 23, 2011
Lol yea
Jerryl
Tall Unvaccinated Chinese Guy
- Joined
- Dec 14, 2004
If you want the colored emblem, try gbodyparts. The one on my 84 is colored.
http://www.gbodyparts.com/product_info.php?cPath=46_22_43_167&products_id=1097
Toby,
I believe the one you are showing was on B4 black cars. It's a rare piece.
Sent from my SM-N910H using Tapatalk
http://www.gbodyparts.com/product_info.php?cPath=46_22_43_167&products_id=1097
Toby,
I believe the one you are showing was on B4 black cars. It's a rare piece.
Sent from my SM-N910H using Tapatalk
TR Custom Parts
Mark Hueffman - Owner
- Joined
- May 25, 2001
http://buickgn.com/HornButtons.htm Order the full size horn button and remind me when ordering that you want it to fit the hot air intake. Be sure to check the full size option. I am NOT missing and my email is mhueffman@snet.net or you can also use trcustomparts@gmail.com
TR Custom Parts
Mark Hueffman - Owner
- Joined
- May 25, 2001
Anybody have one of mine installed already that can send me a pic?
TR Custom Parts
Mark Hueffman - Owner
- Joined
- May 25, 2001
Ours would look like this.
These are what we do for stock appearing wheel caps. Notice a difference? Arrow goes under the 6 vs over like on your emblem. Leave it to Buick to have different versions of the logo
These are what we do for stock appearing wheel caps. Notice a difference? Arrow goes under the 6 vs over like on your emblem. Leave it to Buick to have different versions of the logo
Last edited:
Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
OK - going to figure how to order the under six logo that is 1 and 5/16 inches in diameter.
Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
Ordered - will keep posted once arrived and installed.
TR Custom Parts
Mark Hueffman - Owner
- Joined
- May 25, 2001
We now have a page on the site for these. http://buickgn.com/hotairintakeemblem.htm
Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
Hahahahaha!!
If I had known you were going to do this Mark, I would have cleaned up the intake and the workbench.
Looking forward to receiving my new emblem.
TR Custom Parts
Mark Hueffman - Owner
- Joined
- May 25, 2001
Take another pic after you clean it up and put in the new emblem!
Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
Emblem received and about to install. It is a good replication of the original. The construction is plastic rather than the acrylic paint on copper base of the original.
The paint on the original has a sparkle to both the gold and the red as you can see in the side by side pic below.
It is positioned almost directly below and in from of the turbo so the heat is fairly intense. Only time will tell how the plastic emblem fairs.
All in all, glad to have been able to replace the emblem, thanks Mark.
The paint on the original has a sparkle to both the gold and the red as you can see in the side by side pic below.
It is positioned almost directly below and in from of the turbo so the heat is fairly intense. Only time will tell how the plastic emblem fairs.
All in all, glad to have been able to replace the emblem, thanks Mark.
Attachments
Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
Forgot to mention - if anyone else plans to order this emblem, make sure to show the diameter as 1 and 1/4 inch NOT 1 and 5/16 inches. Still works but could be a tad smaller.
Hot Air Beast
Hot Air Lover
- Joined
- Mar 10, 2007
When you say "original" do you mean General Motors Original Equipment Manufacturer and if so, where did you get it. I am trying to keep my 84 bone stock.
