You can type here any text you want

Search results

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. S

    Wanted, hot air thermostat housing

    My hot air thermostat housing is leaking, multiple pin holes, rusted, anyone have one for sale in good condition? Thanks, Spaulding.
  2. S

    No start

    Hi Guys, I am at the point where I can crank the engine but have no spark. I have fuel to the rail at 45 psi but there is no fuel in the cylinders, plugs are dry. Following the no start tree, it shows the ignition controller is bad/failed. I am going to replace the ignition controller with a 87...
  3. S

    84 85 throttle bracket wanted

    Thanks in advance guys, Spaulding
  4. S

    Torque value

    Does anyone know what the torque value is for the two bolts that join the throttle body to turbo housing?
  5. S

    Turbo oil drain line

    Hi Guys, I am trying to finish an engine I bought in pieces and specifically my questions are regarding the drain tube from the turbo to the intake manifold. Does the drain route underneath/below the fuel injector supply line? Do I have to have the turbo drain at the 6 o'clock position? Is...
  6. S

    Engine install technique

    Hi Guys, I am about to install the engine and trans in my 84 T. I removed them separately, engine first with hoist then the trans from under car with a small floor trans jack. This is a home garage with no lift. My question being is the install easier with the engine and trans together or...
  7. S

    .060 over block with rusted bores

    Hello All, I have a general question regarding my new to me 1984 T type. The block has been sitting open to the weather without the heads on and the hood protecting it but has some rust on the bores. The block has already been bored to .060 and the machine shop said the block could be honed but...
Back
Top