Search results

I need to know which wire controls the ground and which wire recieves the 4th gear signal. A6 (pink wire), and B4 (yellow wire). What I'm trying to do is find the wire that gets the ground signal from the ECM so I can manually lock up the TC for the dyno run.

Hi Guys. I am going to dyno my LT1 that is controlled by DFI 6.32 and the LT1 uses a 700-R4 tranny. I have the DFI controlling the Lockup points on the Convertor, but I'm new at this and I need to know if it's possible to lockup the TC at WOT in 3rd gear. I want the dyno graph to reflect my...

Hi, I've almost completed assembly on my DIY-WB project but am very stuck in one spot where the instructions aren't clear. If you haven't assembled this particular unit, you will have trouble understanding what I'm talking about. Lemme post the link to the pic of the one i'm building and if...

I have an LT1 I just dropped into my car, and am running it with DFI. Now the problem is that I *just* put in a new cam and replaced the cat with a test pipe. Now when I drive the car. there's a metallic sound that I can't tell if it's the motor pinging, or just exhaust running through the...

Their website Carterracing.com is down and I need their phone number. Also, where exactly is Turbo People located in NY?

I just got my motor running, and a decent base program on it. Now I really need to go through emmissions. I have a catalytic convertor on the car now, so that's a big plus. And I'm running the Lingenfelter 219 cam in an LT1 motor, so It's not an overly huge cam. Now, when the DFI is in...

I put a '95 LT1 motor into my IROC, and hooked it up using DFI. To fire up the motor, I used a program off the internet from someone who had a somewhat similar engine combo on ther DFI v6.32. So I uploaded his file, and the engine idles and low revs (to 2500 RPM) very well and smooth. Not...

I just built a brand new LT1 motor for my camaro and have it controlled by Accel's 6.0 DFI and Calmap 6.32. Well with the idle on the Calmap set at 750, the car still idles at 1500! My idle air screw on the TB is set all the way in, so the blades are closed! My TPS reads 0% with the blades...