Search results

Is it normal for the HVAC to turn off the blower fan under boost? Any time the boost goes above 0 the HVAC fan stops blowing and It’s really annoying when u want the ac on and trying to merge into traffic

Got a powerloger hooked up and looking for an expert to review as I am having some knock. Testing is mostly in 3rd as this is more a true knock indicator from what I have read. Mods: 3.5" MAF with translator, TT chip for 93 oct, FMIC, 3:" DP and test pipe, 60 LB inj, DW300 w hot wire...

Not sure how to wire up the new pump. The new wiring is red and black. Do I splice into the gray into the red and black in to the black which is in the tank? Should I use the original 3 wire connector to connect up to the new hot wire kit? Other posts have the tube cut off to...

I installed the GN1 dual fans in place of my factory fan. When I had the factory fan in I had a manual switch to turn in the fan which was done with one wire hook up. How do I wire this feature on the new fan. The wire is there I just need to figure out where to hook it up to.

Car currently has variety of mods that should be around a low eleven second car but still has the stock pump with first version of the Kenne bell boost a pump. Long term goal is high tens so the question is do I go with the DW200 or the DW300? Do I leave in the boost a pump or switch to...

Looking for the front and rear aluminum inner bumper crash supports shipped to 56301. This is the part that runs the inside of the entire length of the bumper. Yes, I know you can cut the steel ones down but this for a mostly street driven car so I would to still like to have some protection.

No matter where I set the controls at MAX AC, NORM , VENT or DEFROST about 20 % of the air is always blowing at my feet. I replaced out the plastic blower cage with the metal one as others stated this helped the air flow amount and then realized this was not the issue. Found a couple old posts...

Current setup 3" DP, P&P Heads with bigger valves, 208/208 cam, 2800 stall 12", Newly installed turbotweak chip, 60's and GN1 FMIC. I attached my turbolink file for review. (Yes I know the old way). Trying to move my car to the latest chip tech. The chip is amazing at idle. The issues I...

Bought new NOS style 8 hole hood. Bringing it to the print shop to get the lettering put on it match the old one. Questions: What is the actual color? looks like a silver color? Anyone try a different color? Any Install advice? Looks like a three person job if I don't take off the...

Switched to a FMIC so I went with a one piece lower air dam. The finish on the air dam looks like a shiny rough orange peal. There is also some waves on the finished side that looks there were issue when it came out of the mold or when they put the coating on. My thought is to sand it down...

Switched to a FMIC so I decided to go with the one piece lower front air dam. The finish on it looks like a bad gloss black orange peel. The plastic is flat on the back but has some ripples on the finished side like is wasn't formed correctly in the mold. Looks like $HIT. Wanted to sand it...

Switching to 85mm MAF from Full Throttle and 60's. So if I understand it correctly the axis replaces the MAF translator? I would like to take advantage of the higher MAF readings so I thought the extender chip would be the best choice but not sure. Option 1 - MAF translator and extender...

Looking for a GOOD condition DRIVERS side lower air dam that goes below the bumper

Working on installing my GN1 super extreme front mount and wondering if any one has pics of images put on the front so you can see it through the grill. I have seen a pic in the past where someone put the turbo 6 emblem but cant seem to find it. Don't want to paint it all black for the I mean...

I am always checking out my gauges while driving to see how things are going. I look as I am sitting in traffic my temp gauge about 220 - 225. Luckily the the light turn green and I continued driving and cooled back down to 200, still running to warm. I get to my destinaition and the...

rebuilt about 2K ago. Having problems with 1-2 at part throttle and WOT. sometimes it shift into 2nd OK but mostly it will rev to 3k before shifting. once it is in gear it seems fine. I have some experieince with engines but zero working on trannys. What could be the cause?

About 10 years ago I bought one of those lifetime warranty powermasters. I am now having problems. I read one of online troubleshooting guides and I still not sure. here are my symtoms.... After pressing the brake peddle 10 times and turning the ignition on the pump will run for about 20...

anyone know where I can get one for the cheapest price? There selling them on ebay for 150.00 with shipping. Part made by Cardone/Hydac. Seems like a good price but not sure on the quality of the brand. anyone used this brand? anyone have a used WORKING one?

I am a rookie when it comes to understanding suspension stuff. How do you know when your shocks are bad? any quick test for this? I know my springs are bad since the car goes down 1" after a 100 lbs is added to the trunk . Shocks and springs are 15 YEARS old. Rock Auto has few listed for...

On NBC they were showing previews of a show called Life which is cop show and it showed a couple of clips of a guy driving a gn. Show I watched the entire show wating for this clip in the preview of the car sliding sideways. In the end all they show was him getting into his GN. It looked...