Search results

  1. A

    Wideband Noob!

    I appreciate your response and the attention to detail in it. I will use this to wire mine up this week! Thanks again!
  2. A

    Wideband Noob!

    Basically what I am having problems with is where the wires join. Do all the wires join together from the sensor to the plug that goes into the gauge? 2 are grounds, 1 is hot (12V switched) the brown is analog output and the yellow is digital, so leave out the brown in the whole equation...
  3. A

    Wideband Noob!

    Subscribed. I have the same unit and I am half way through installing it with 100 questions of my own. I have the wires run into the car, and the gauge in the pod. I have a scanmaster and no powerlogger as do you. My biggest concern was getting the reading onto the gauge so I can read...
  4. A

    Never wrap your downpipe...

    That wrap is fine. You are going to smell that burning for a few weeks. I wrapped many of my downpipes (motorcycle, MR2) and the smell is always there (A hint of it at least) and if it gets wet, it will smell as the exhaust dries it off. It's just the nature of the wrap. I've run mine on...
  5. A

    Intercooler Piping

    I would have made the call, but that would have probably had me sending the pipe back to them for another one. I live up in Canada and shipping on it, would cost me more $$ and time then just doing what I did. The down time would suck too. I bet most of these kits are sold with the...
  6. A

    Intercooler Piping

    The fans I bought were form GN1 Performance They are a really nice set, came with the shroud, the fans and a plug that plugs directly into the stock harness for no modifications. I know that the couplers that came with my IC kit are silicone, they are a 3 ply silicone. I think they make them...
  7. A

    Intercooler Piping

    Gents, I tried cutting the silicone hose and re-adjusting the intercooler to get it to fit, however none of that worked. In the end i ended up Cutting off 3/4" off both pipes, the end that connects to the TB and the other that connects to the turbo outlet. That and the cut silicone hose that...
  8. A

    Intercooler Piping

    Thanks for the suggestion. I appreciate the help guys. I'm guessing your talking about the side of the tube that goes towards the turbo. Could an exhaust sop put that bead back into the pipe for me?
  9. A

    Intercooler Piping

    I was wondering if anyone has had this problem before. Basically, I have bought a front mount intercooler kit, aftermarket RAD and after market fans. I didn't get the parts from Ebay, I got them from the vendors here on the forum. Basically what is happening is that the pipes for the...
  10. A

    3.5" DP question

    I just fitted a 3.5" into my 87. Fitment was great. A little maneuvering and it was in there without having to modify anything. The wideband bung looks to be in a good spot too so that it Clears the AC lines and strut tower. I ordered mine from gbodyparts.com and it has the wastegate...
  11. A

    TE 60 Setup Questions

    Hey Guys, I have done a lot of searching on the forum here but can't really find answers to the questions I have so I was wondering if someone could shed some light on the subjects for me. 1. The TE60 I got didn't come with a wastegate, I'm assuming that taking the wastegate of the stock...
  12. A

    New GN Owner - Please Help ID Turbo in My Car

    Sorry for the long post. Just took this turbo off the GN. I'm trying to figure out what turbo it is as I will be buying a new turbo for the Grand National in the next few weeks, I need to have a starting point so that I know what the engine previously had in it before I begin to modify. All...
  13. A

    87 GN Turbo Question - n00b To The Board

    You guys are awesome. I appreciate all your input. The reason i want to just start with a fresh block is because I want to build the motor while he still has his in the car. So i will start with the 109 block and work from there. Turbo TN, your putting down some good numbers with your...
  14. A

    87 GN Turbo Question - n00b To The Board

    He's getting a 'Knock' in the bottom end, had his heads done not too long ago, but never concerned himself with the bottom end of the motor. Has close to around 260,000km on the motor right now. I don't want to sound conceded saying this, so do not take me the wrong way please. But do you...
  15. A

    rebuild and machining cost

    Subscribed. I'm looking for the same Information. Bump
  16. A

    87 GN Turbo Question - n00b To The Board

    Hey Everyone, Well, some background on my situation here and I'm hoping that i can get some answers, so pleaes read on and post some insight if you can. Basically, my experience is in the import scene, Toyota MR2's, Supras, Nissan 240's and basically any Turbo charged car that came from...
Top