Search results

  1. M

    For Sale: 1987 Regal Turbo LS3 Conversion

    Is there any good write ups on changing the pinion seal on the rear axel? Is there a bearing to be replace also? Does anyone have part numbers also? Mines is leaking Sent from my iPhone using Tapatalk
  2. M

    Trans pan cork gasket; install dry or w/silicone?

    I’m putting new axels in my rear end. I need to buy moser axels (a102808) and the bearings. what is the correct I.d for the bearings? I saw one that was 1.4000 and another that was 2.400. I’m purchasing from summit racing because it’s free shipping. Sent from my iPhone using Tapatalk
  3. M

    Brake line bracket

    Ok guys. I’m looking for a brake line bracket. It bolts to the frame and goes on the front passengers side. It takes the hard line and holds the nit to convert to soft line for the caliber. I have the drivers side here’s a pic please some one tap in and let me know if they have one or where I...
  4. M

    Bates 2019

    I attended Bates this year for the first time. I can’t tell you how amazing it was! I got to meet a lot of great guys, who have a lot of passion for these cars and were happy to talk about how to make our cars faster and just perform good. From what I was hearing it wasn’t as big as last year...
  5. M

    Z06 rear disk set up

    Can some one guide me to an older post or give me some info on putting z06 14” rotors and z06 front calipers on the rear? I know they make brackets. Does the bracket change the off set? I have seen videos of guys cutting the rear end ears off to put blazer and ls1 disk but will that work with...
  6. M

    Random pics at work [emoji600]

    Sent from my iPhone using Tapatalk
  7. M

    Cruise

    So, who saw the movie Cruise on Hulu? Who’s national did they use? Sent from my iPhone using Tapatalk
  8. M

    Cali Exuast law

    I thought I would bring this up. With 2019 here and the law on loud Exuast not exceeding 95db how many of you are going to be affected by this? Also if you do get a ticket which is $1,000 non fix it ticket and then having to go see the referee are you screwed? The refs will go thru our cars with...
  9. M

    Frame reinforcement

    So I’ve been doing a frame off on my car. And I had an idea. Sent from my iPhone using Tapatalk
  10. M

    Frame notch advise

    I measured 1 1/2 inches in all the way on the wheel well on the frame. All is good till I get to this point on the bottom of the frame. At this point in top is 2 1/4" but on the bottom it's only 1 1/2" but it makes its way back to 2 1/4. What should I do? Back it down to 1 1/4" or just do it at...
  11. M

    Trunk lid torsion bar

    Does any body know of a company that makes a gas strut replacement for our torsion bars? Sent from my iPhone using Tapatalk
  12. M

    all wheel drive buick.

    i'm sure you all seen the olds with all wheel drive. has any one attemted to do this to a buick?
  13. M

    Frame

    just like title says I'm looking for a frame. Mines has dents on it. I live in sacramento so closer the better
  14. M

    Box in

    Does anybody have pics of a box in on the frame rails?
  15. M

    Frame notching kit

    I remember seeing some one selling a frame notching kit. Does any one know what company it was? My frame has dings on it from last owner. So I might as well notch it. Thanks guys
  16. M

    Need advice

    The kid who had this car before me must have had big rims and the wrong offset. Only on one side of the frame is it banged in. what should I do he must have been doing donuts all the time and one time hit a curb. The whole axel seems to be off just a lil man I need some help. Still trying to get...
  17. M

    Fuel lines

    I'm taking the body off the frame and I see the gas lines in the fender. There lines on both sides am I ok if I just disconnect the 3 lines by the pump?
  18. M

    Box in frames

    I'm doing a frame off and I seen a box in kit. I also seen some really nice brace work on over the rear axel. I know their good to have but is it something that should be done? If I'm not racing. I can see the box in kit helping out but over the rear wheel hump? I only plan to run low 11, 10.9...
  19. M

    Passenger side harness

    How do I get to the harness on the passenger side under thee a/c unit? I need to remove it, so I can get the body off the frame. I took all the bolt from under the wheel well, but there's some on top of the well I can't get too.
  20. M

    Frame/body bolts

    Ok so I've been reading about frame offs and I want to make sure I'm doing this right. The bolts that are in the car they are covered. I have to use a whole saw to expose them? Posted from the TurboBuick.Com mobile app
Top