Search results

  1. A

    #1 (Core Support) Body Bushings

    thanks Mike!
  3. A

    #1 (Core Support) Body Bushings

    Can anyone post some pictures to show how the #1 position body bushings should be installed between the core support and the frame. I have an 87 GN that I bought partly dissasembled in the front after a small collision, and is all straightened out and ready for reassembly. I have the stock GM...
  4. A

    11" bolt on brakes

    I just bought spindles from a 2wd 2000 blazer--they look to be correct, but I noticed that the piece that comes off the spindle for the tie rod ends to attach to are at a slightly different angle (when comparing the two different sides) Is this correct?? I hope this explanation makes sense, if...
  5. A

    American Racing Wheels

    One last question--do you remember the front backspacing? maybe 4" or 4.5"?? Thanks again
  6. A

    American Racing Wheels

    Thanks for the info guys--should have the car painted and on new wheels in a couple months!
  7. A

    American Racing Wheels

    Do you know what backspacing you have on the 17x9.5 rear wheels?
  8. A

    Looking to replace entire front/rear suspension- Need Advice

    here's a pic all done
  9. A

    Looking to replace entire front/rear suspension- Need Advice

    I bought the front end rebuild kit along with new upper control arms, lower ball joints, lower control arm bushings, springs and shocks--all from G-body parts, and it turned out great--might as well do it all at once. If I could do it over, I would look for a knuckle/brake assembly from an...
  10. A

    American Racing Wheels

    Thanks Blues-49, you had said in another post that "A friend of mine is running 285 x 40s x 17 on his t type on torque thrusters with bfgs g force tires-fit perfect." Do you know which model torque thrust wheels he has, and any specifics on rim widths and back spacing? Thanks for your help--I...
  11. A

    American Racing Wheels

    I have been looking at the American Racing Torque Thrust M wheels--they have 17"x8" with 4.5" backspacing--can anyone tell me if I am on the right track with sizing? Is anyone running these wheels/can you post pic's/tire sizes--Thanks! Dave
  12. A

    Posi traction rebuild kit?

    The parts guy I spoke with today gave me a part #231127 clutch pack kit--but he said it is discontinued--is this correct--does anyone have any other leads for me??
  13. A

    Posi traction rebuild kit?

    does anyone know of a good kit available to rebuild the posi in a stock Grand National rear end?? I have it apart to replace the outer bearings and seals, so I am looking to do it all at one time--Thanks
Top