Search results

Installing a aem wideband to my power logger. I know the white wire goes to pin 1 on the I/o connection and the brown wire is ground. In Eric's diagram he grounded it on the ecm case. My question is am I able to ground the brown wire which is 0-5 volt analog negative to pin 4 or 6 on the I/o...

Have an accufab tb. They come bare without the throttle lever. Will buy someones complete throttle body if that's all you have. Also looking for the piece that bolts to the intake and holds the cable in place.

Have a champion alternator relocation bracket. Want to run a 16 volt deal for Holley dominator. Any of you know where I can get an alternator to fit that bracket? Is it just a standard GM alternator that was on a bunch of different models. Basically they want alternator specifics and I don't...

Where do you like to mount the strip that is provided with the powerlogger?

Is it the same as a sbc? Also the cam sensor hold down can I just use a distributor clamp from a sbc?

Anybody use them? Thinking about picking up a set of his race headers with a T5 flange and egt bungs. Looks like a nice set and definitely cheaper than having a set made. Just looking for some feedback.

I'm installing a jw flywheel on a eagle crank and 2 of the mounting holes are slightly off. I was just going to open them up a tad with a grinder. Anyone ever run into this? Just curious.

Anyone know a vendor that has them? Seems there getting very hard to find ones that will fit a champion intake and fuel rails.

What type of sealent do you guys like to use?

Going to be running felpro 1200 intake gaskets and the gn1 alluminum valley cover. Will be running breather lines to a catch can off of the valve covers. I'm assuming I can just plug the hole in the bottom of the intake where the pcv would go correct? Technically I wouldn't really even have to...

Installing a dominator system on my car. My question is I'm assuming I can run the factory cam and crank sensor correct? Is there a certain brand senor you guys prefer to run? Where can I purchase both crank and complete cam sensor with cap and where can I get pigtails for both to wire them in...

When I click on a thread the screen is dark. The Google chrome poos up at the bottom . If I click on it all I get is other website options. Using my phone, anyone know how to fix this.

My eagle crank came with the keyway already installed, using a rollmaster timing chain and the height of the keyway is maybe only halph of the slot on the crank gear. Has anyone seen this issue before and had problems with it? I would definitely be more comfortable with more engagement on the...

Installing a crower solid roller in a ta block. First time working with one of these blocks and have a few questions on the front set up. The cam retainer plate that bolts to the front of the block does anyone know a torque spec? Then I have the spacer and drive gear, what orientation do they go...

Arp 2000 rod bolts. Spec is max .0064 stretch. I came in at .007 on two of them. Would you back them off and seek up on the spec? Or would you be comfortable with .007? I'm thinking there could be a lot of human variables when taking measurements.

Correct me if I'm wrong but when installing a off center rod either stock 2 dot or aftermarket forged piece. The bearing thangs face the pan rail and the offset of the rod will always be facing the counterweight of the crankshaft. Is this correct?

Prefer no engine. Have cash

Wanting to get opinions on the correct way to measure for Pushrod length. What checker do you use and how you do it. For adjustable rockers and stock rockers. Thanks in advance.

Looking for pretty much just a stock replacement. Is there a brand that you prefer?

Is there some where that I can get a ton of information on to what goes in to building a ta aluminum block engine? As far as machining and assemble processes