Search results

  1. D

    Fresh DLS 109 Stroker Motor

    Did this sell?
  2. D

    push rod length

    Rick, I measured them on the car last week and I am waiting for delivery. I was just curious what other peoples experiences were. I wound up with three different sizes. If the heads were off I might consider roller rockers as I would not modify the pedestals on the car as it sits now.
  3. D

    push rod length

    Thanks Guys, I am aware of why we have variances and how to correct them. If I had an engine out of the car I might consider adjustable roller rockers. I think with most roller kits the push rods are shorter due to the additional height of the lifters. I want to know what builders have seen...
  4. D

    push rod length

    Concerning length ..........What is the largest variance between push rods installed in a 109 w/iron heads,comp 210/215 roller w/ Morel lifters and Cometic head gaskets or a similar build. Just wondering what you guys have seen in some of your builds. Thanks
  5. D

    fuel regulator

    Stripped the bottom of my accufab regulator.....the threads on the return line are ok. Does anyone know what heli-coil kit (size) I need to get.
  6. D

    head porting

    Looking for guy that ports turbo heads. He introduced himself on here about a year ago.He considered becoming a supporting vendor. He was also recommended by someone on the board. I think he is located in the south or southeast area. He had a web site and offered three levels of heads. I cant...
  7. D

    86 Chestnut T

    Yeah that was me at County Line Probably at the Gas city also They are not American Racing wheels.....I think Liquid Metal
  8. D

    really bad night, tonight

    Very Sorry Larry, My condolences
  9. D

    Quick TT chip question...

    Its not 1.5 % leaner than the other gears? 3.9% leaner from base? Confused
  10. D

    stock crossover pipe

    turbo 85, do you still have the crossover pipe?
  11. D

    Headers

    ttt
  12. D

    Headers

    Looking for a stock drivers side header and a crossover pipe , I am looking for quality. Thanks
  13. D

    Brass Block for the oil sender...

    I got one.....just replace it when you get yours
  14. D

    Memorial Thread To Kasci Weaver!

    Brian and family, I am very sorry for your loss.
  15. D

    S. suburbs Chi. double - header cruise 6/12!

    Do I have to? Hell yes!!!!!!! I'm in
  16. D

    oil types

    Mobil1.com click on the oils icon after the introduction I believe its online ordering my distributor through work is also checking to see if he can get it for me.
  17. D

    oil types

    I agree that viscosity is defined as thickness. However, I believe Mobil 1 has the ability to FLOW FASTER, regardless of temperature down to 35 below zero. I proved this to myself by putting a quart of Mobil1 and a quart of conventional Mobil oil outside overnight when the temperature was 10...
  18. D

    Removing valve cover on passenger side

    you should not have to remove the black plate around the heater assembly. Get the heater hoses and heater control valve out of the way, take them off if needed. It will come out it just needs to come out at the correct angle. Pull up on the oval conduit (wire harness) while pulling the cover out...
  19. D

    New Walbro Pump

    I have close to 1500 miles............ been working great so far
Top