Search results

  1. T

    "Stress relief"..

    I had a problem with the crossover on my s2 engine. I used a flex coupling like that. Solved the issue. Nice work! Turbodave231
  3. T

    Notes from my a/c conversion

    I don't want to sound like a jerk, but I have a difficult question for you. I read the MSDS sheet for the refrigerant you selected. Butane and Propane are the two main ingredients! I don't think it is EPA SNAP approved or even safe for that matter. I bet it cools like crazy, but it also sounds...
  4. T

    Fitting Billet Main Caps and Line Boring on a CNC Machine Center

    You will need to remachine the oil pump pickup flange area. Cutting the pan rail will extend into that area. I made a special fixture to measure from the pan rail to the top of the cap. It sits on both rails and goes over the cap. Sent from my XT1254 using Tapatalk
  5. T

    Take a look at a balance card

    That Bob weight can't possibly be correct. Even at 50% Sent from my XT1254 using Tapatalk
  6. T

    Look what I found in my engine

    I have many stock pistons. I'll send them free if you need one or more. Sorry no rings. Sent from my XT1254 using Tapatalk
  7. T

    Governor Gear 11 tooth Orange in color

    I need a good governor Gear for a BQ or BR code trans. Got one you want to sell? Sent from my XT1254 using Tapatalk
  8. T

    intake manifold stud?

    Take an old 10mm wrench and grind it thin enough to hold the stud under the tab on the pipe. Use an impact to loosen the nut Sent from my XT1254 using Tapatalk
  9. T

    Octane RON

    LPG has an R+M/2 just over 100 if I remember correctly. You loose volumetric efficiency with gaseous fuels because the vaporized fuel displaces air, but the turbo helps make up the difference. A turbo engine should run quite well on LPG. Sent from my XT1254 using Tapatalk
Top