Search results

You can also do one side at a time top avoid shifting the body on the frame. Although there are alignment holes by #2 bushing to help re-align the body.

Thanks for the info on the Walker part, I''ve just ordered one and will finally fix the torn mount.

I've always had luck with using a can of tire shine foam to clean up my original insulator. Just cover everything else with poly before you spray it! :)

X2 on only replacing the one weak hood shock instead of both of them. I just did this, passenger side only and the hood will rise up on it's own after opening half way and is reasonable to close. Rock auto Stabilus SG330004 $11.20, can't go wrong. In 5 years time, I'll replace the drivers...

Go with the LT4 starter and never look back. Remy Part # 99719, $134 from Rock Auto, no core charge. Works awesome and built really well

Great work! Can you share the source for the bushings? Those look good and it's on my list for 2017. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

All those replacement pillars are crap. Here's the fix I went with. Took a Lotek pod and a stock A pillar and cut the section off the stock pillar that was needed. Then had a guy in town 'plastic weld' the two sections together. Bought some texture spray to spray the part and painted gn gray...

Dorman 610-323 longer studs with the correct knurl. Install and then running spacers will be no problem. I used to run a 5/8" spacer up front with no issues. Sent from my iPhone using Tapatalk

.509 is the right size knurl. I used a set made by Dorman when I had rear offset gta wheels on the front of the car. They fit properly and snug. Sent from my iPhone using Tapatalk

Yep, dex6, just did mine Sent from my iPhone using Tapatalk

Finally got some hoist time and finished installing the Pypes exhaust. It is quiet but has a really nice rumble at 2000 rpm and really wakes up at WOT. I had to cut an inch off both tailpipes as others have said. Every car is different. Will see how it sounds over the next week and try and heat...

gn87turbo, those are looking great!

Thanks guys, a local shop up here did them. 1kwiksix, the machinist actually mentioned about being careful not to thin out the lip of the rim. He said he just sands down any curb rash marks by hand, taking the rough edge off and then a thin cut with the CNC.

I had a set done and was told that they strip the powder coat off the centre section then cnc the aluminum ring removing all the rash and oxidation. Apply new powder coat to the centre and then clear coat the entire wheel. Cost around $100 per wheel though, not cheap but good results Sent from...

Nice Dave! Definitely got me on the year. I think my original was circa '95 and now we have the yellow collector car plates [emoji4] Sent from my iPhone using Tapatalk

Here's mine I've had for years Sent from my iPhone using Tapatalk

SEM trim black is a great match for exterior trim. I did the impact strips, bumperette strips etc

Just installed the "bumperette" strips from highway stars and they are identical to stock. Nice pieces, in case they are tough to find from gm parts

X2... ordered a set of outers from Highway stars, plus they have a stainless core. Can let you know how they fit by the weekend.