Search results

  1. 6

    Oil filter oil leak - engine experts please step in

    I have installed a couple of oil pumps w/no leaks. I put on a High volume TA oil pump and a booster plate and now oil is pouring out from between the plates on the oil pump! Did I maybe use the wrong gasket in the wrong place? Or not torque the bolts ? Got any thoughts on this issue? There is a...
  2. 6

    NOS GM door skins, Hood Pad, IC shroud/scoop assy.

    2 NOS GM door skins, 1 R, 1 L, $600.00 firm 1 NOS Hood Insulation pad, 8 hole $250.00 firm 1 NOS GM IC shroud/scoop assy. $200.00 firm Will deliver to Buick GSCA Nationals in Sept. Will not ship Door skins sell as pair only, will not split. Keep your car all GM...
  3. 6

    My roller cam engine is Running !!!! Yahoo

    At last, at last! The roller cam engine that Lee Thompson built for me is finally running!!!!! A long, long story, but it has been down for going on 3 long years and Lee stepped in and bailed me out! I will never forget this, either. But for Lee, I don't know how I would ever got it built. My...
  4. 6

    Need a IC scoop, good one or reapirable

    I am looking for an IC scoop or a junk Shroud with a good or repairable scoop on it. Really would like to find a good scoop or am I looking for the unobtainable? Thanks It doesn't have to be perfect, it is for my driver car & occasional drive in's, not show.
  5. 6

    Wobbling crank pulley

    Things I learned on the way to somewhere else. Bolts in the crank pulley that are too long and bottoming out in the balancer before tightening on the pulley WILL cause the pulley to wobble. Now after I have chased my tail for 2 weeks chasing new pulleys, balancer, I find out all that I need is...
  6. 6

    20 bolt oil pan -engine oil pan

    Wanted a good driver 20 bolt oil pan. Don't need/want a show piece, just a good usable driver quality. Thanks.
  7. 6

    Valve cover hold down bolts

    Please help. I need 3 valve cover hold down bolts/stud. If someone has these or a set, I will be glad to pay! My engine has been sitting in a shop for 3 years and these were lost and now I am trying to put my engine back together and I need (2) standard hold down bolts and (1) stud for the...
  8. 6

    Valve cover hold down bolts

    To get my Lee Thompson built roller cam engine running, I need 3 HA valve cover hold down bolts, (1) is a stud that holds the vacuum motor to the valve cover. I will buy a full set, but only need the 3. Long story , but I am trying to keep from having a basket case. the engine has been down for...
  9. 6

    Front bumer spacer to bumper mount

    I need at least 2 of the spacers/shims that are used between the bumper and the bumper support that bolts to the frame. These adjust the bumper to the header and the bumper fillers. Please help me out. Thanks
  10. 6

    NOS door skins for sale

    I have (2) NOS GM door skins for sale, (1) right side, (1) left side. $500 for both, I will deliver to the Buick GSCA Nationals in BG in Oct or to w/i 100 mi. radius of BG. They are not in the original GM boxes and may have some very slight, unnoticeable storage dings.
  11. 6

    NOS GM door skins F/S

    I have (2), 1 right side, 1 left side, brand new GM door skins for sale. I will deliver to the Buick GSCA in BG in Oct. Local P/U, I am near BG and can deliver as far as Louisville & Nashville, Tenn. $500
  12. 6

    Help! I need "how to" install a later model Buick roller cam in our engine?

    Help! I need to know step by step how to put a later model Buick rolleer cam in our engine? I can't find the threads that talked about this.
  13. 6

    87 Oil fill tube & cap

    Help, please! I have lsot the oil fill tube & cap off my 87 GN w/ 18 K mi. I would like a nice one to replace it. Please E mail me a picture and price. Thanks. Mark aka 6 to go
  14. 6

    Intermittent engine miss problem

    I have been fighting this problem for ~ 10 or 12 years now! It misses at cruise, starts good, pulls strong, doesn't die, but will miss and maybe run a few minutes and miss again. It doesn't miss at idle. Doesn't seem to miss pulling hard. I have installed new crank sensor, cam sensor, battery...
  15. 6

    Help tuning alky injection?

    I have installed a progressive alky injection kit on my IC'ed 84. I set it to start @ 15 psi and full in @22 psi. When it starts to inject , the car stalls and falls on its face. Do I need a special alky injection chip? do I need to start injecting at a higher psi? Or just take the kit off and...
  16. 6

    Parts for sale will deliver to GSCA Nats - won't ship the big stuff

    86/87 GN front bumper - good paint with bumperettes $150 Rear bumper - painted black, but good paint with black bumperettes $100 NOS 8 hole hood liner with logo - $300 NOS 86/87 AC lines across radiator - -$150 used 86/87 fuel rail w/ injector wiring harness, stock injectors & FPR...
  17. 6

    Fresh wax on my 84 WH 1

    Here is a picture of my 84 WH 1. I have 1" lowering springs and bilstein shocks on it.
  18. 6

    G-Force good seller

    G-Force is a good guy to buy from. Accurate description and ships quickly!
  19. 6

    Intermittent engine miss

    My 84 has an intermittent miss. I have changed plugs, coil & coil pack, & plug wires. I am running an LT 1 MAF with a Translator (old one). It used to run fine with the same MAF & Translator. I am out of ideas! I did a search & this seems to be somewhat common problem, but few solutions...
  20. 6

    NOS Alcohol injection kit F/S

    I have a NOS alcohol injection kit made by Edelbrock back in the day. I never have used it and thought it might be of help to somebody into B4B. I am posting here because of the limited interest for it, I guess. It is complete, in the box, with instructions, etc. I will take $100 + $25...
Top